7 Inch Capacitive Touch Screen HDMI LCD 1024×600 Toughened Glass Panel

General Description:

This 7 inch HDMI TFT could work directly in Win 7/8/10 and X86 system, embedded TFT hdmi display module, no need to other driver, please connect to USB port first to the hdmi lcd module, then next connect hdmi port to the tft lcd.This hdmi lcd tft module also support Raspbian and Ubuntu mate system.please adjust the display resolution before using hdmi lcd in Raspbian system.Power input via USB port for this 7 inch hdmi tft lcd moduel, and USB port is also for touch interface on this hdmi lcd.

Specifications:

Ctp Characteristics:

Connection Examples:

Working With Raspberry Pi 4

Working With Raspberry Pi 3B+

Working With Raspberry Pi Zero W

Working With Mini PC

Works with Raspberry Pi:

Step 1, Install Raspbian official image

1.Download the latest image from the official download.

2.Install the system according to the official tutorial steps.

Step 2, modify the “config.txt”

After the programming of Step1 is completed, open the config.txt file of TF card root directory and add the following code at the end of the file, save and eject Micro SD Card safely:

max_usb_current=1

hdmi_force_hotplug=1

config_hdmi_boost=7

hdmi_group=2

hdmi_mode=87

hdmi_drive=1

hdmi_cvt 800 480 60 6 0 0 0

Step 3, Drive the 5inch HDMI Display-B with the Raspberry Pi

Insert the TF Card to Raspberry Pi, connect the Raspberry Pi and LCD by HDMI cable; connect USB cable to one of the four USB ports of Raspberry Pi, and connect the other end of the USB cable to the USB port of the LCD; then supply power to Raspberry Pi; after that if the display and touch both are OK, it means drive successfully (please use the full 2A for power supply).

Works with PC:

1) Turn on the backlight switch on the back of the LCD.

2) Connect the LCD's TOUCH port to the PC's USB port. Wait for a moment, Windows will automatically recognize the touch function.

3) Connect the HDMI port of the LCD to the HDMI port of the PC and wait for about 10 seconds to see the normal display of the LCD.

Attention:

1) When the PC is connected to multiple monitors at the same time, it can only control the cursor on the main monitor through this LCD, so it is recommended to set the LCD as the main monitor.

2) Some PCs do not support HDMI devices plug-and-play, generally after rebooting the system can be used normally.

3) Some PCs may have insufficient power supply for USB interface, resulting in LCD flashing screen, which can be used normally after accessing external 5V/2A power supply through DC interface.

Packing List:

1 x Touch Screen
1 x HDMI Cable (50cm)
1 x USB Cable (80cm)