Raspberry Pi 7 Inch 1024×600 HDMI LCD Display With Touch Screen

General Description:

1. 1024×600 high resolution

2. Capacitive touch control

3. Supports Raspberry Pi

4. Supports Banana Pi / Banana Pro, comes with Lubuntu, Raspbian images

5. Supports BB Black, comes with Angstrom image

6. For other mini-PCs, driver is required and should be developed by users

7. Not only for mini-PCs, it can work as a computer monitor just like any other general HDMI screen

8. HDMI interface for displaying, USB interface for touch control

9. Backlight can be turned off to lower power consumption

Specifications:

Ctp Characteristics:

Connection Examples:

Working With Raspberry Pi 4

Working With Raspberry Pi 3B+

Working With Raspberry Pi Zero W

Working With Mini PC

Works with Raspberry Pi:

Step 1, Install Raspbian official image

1.Download the latest image from the official download.

2.Install the system according to the official tutorial steps.

Step 2, modify the “config.txt”

After the programming of Step1 is completed, open the config.txt file of TF card root directory and add the following code at the end of the file, save and eject Micro SD Card safely:

max_usb_current=1

hdmi_force_hotplug=1

config_hdmi_boost=7

hdmi_group=2

hdmi_mode=87

hdmi_drive=1

hdmi_cvt 800 480 60 6 0 0 0

Step 3, Drive the 5inch HDMI Display-B with the Raspberry Pi

Insert the TF Card to Raspberry Pi, connect the Raspberry Pi and LCD by HDMI cable; connect USB cable to one of the four USB ports of Raspberry Pi, and connect the other end of the USB cable to the USB port of the LCD; then supply power to Raspberry Pi; after that if the display and touch both are OK, it means drive successfully (please use the full 2A for power supply).

Works with PC:

1) Turn on the backlight switch on the back of the LCD.

2) Connect the LCD's TOUCH port to the PC's USB port. Wait for a moment, Windows will automatically recognize the touch function.

3) Connect the HDMI port of the LCD to the HDMI port of the PC and wait for about 10 seconds to see the normal display of the LCD.

Packing List:

1 x Touch Screen
1 x HDMI Cable (50cm)
1 x USB Cable (80cm)

Attention:

1) Some PCs do not support HDMI devices plug-and-play, generally after rebooting the system can be used normally.

2) The polarizer surface should not come in contact with any other objects.

3)Store the LCD modules in a sealed polyethylene bag. If properly sealed, there is no need for the dessicant.