10.1 Inch IPS Tft Screen 1280x800 Lvds Interface 40 Pins EJ101IA-01G
General Description:
The EJ101IA-01G has an operating temperature of -10 ~ 50°C and a storage temperature of -20 ~ 60°C. Based on its white LED backlight, terminal flip-flop and other features, this model is recommended for use in tablet PCs.
Specifications:
No. | Item | Specification |
1 | LCD size | 10.1 inch(Diagonal) |
2 | Driver element | a-Si TFT active matrix |
3 | Resolution | 1280 × 3(RGB) × 800 |
4 | Display mode | Normally Black, Transmissive |
5 | Dot pitch | 0.0565(W) × 0.1695(H) mm |
6 | Active area | 216.96(W) × 135.60(H) mm |
7 | Module size | 229.46(W) ×149.1(H) ×2.50(D) mm |
8 | Surface treatment | HC |
9 | Color arrangement | RGB-stripe |
10 | Interface | Digital |
11 | Backlight power consumption | 1.76 W(Typ.) |
12 | Panel power consumption | 0.7W(Typ.) |
13 | Weight | 0.183KG(Typ.) |
14 | inversion | 1+2line |
15 | IC | HX8288*4&HX8695*1 |
Absolute Maximum Ratings:
Item |
Symbol |
Values |
Unit |
|
Min. | Max. | |||
Power voltage | VDD | -0.3 | 3.9 | V |
Operation Temperature | TOP | -10 | 50 | ℃ |
Storage Temperature | TST | -20 | 60 | ℃ |
LED Reverse Voltage | VR | 2.7 | 3.1 | V |
LED Forward Current | IF |
--- |
50 | mA |
Typical Operation Conditions:
Item |
Symbol |
Values |
Unit |
||
Min. | Typ. | Max. | |||
Power voltage | VDD | 2.3 | 2.5 | 2.7 | V |
Input signal voltage | VCOM | 2.7 | 3.0 | 3.3 | V |
Input logic high voltage | VIH | 0.8 VDD | / | 3.6 | V |
Input logic low voltage | VIL | 0 | / | 0.2DVDD | V |
Optical Specification:
Item |
Symbol |
Condition |
Values |
Unit |
||
Min. | Typ. | Max. | ||||
Viewing angle (CR≥ 10) |
θL | Φ=180°(9 o’clock) | 75 | 85 |
- |
degree |
θR |
Φ=0°(3 o’clock) | 75 | 85 |
- |
||
θT | Φ=90°(12 o’clock) | 75 | 85 |
- |
||
θB
|
Φ=270°(6 o’clock) | 75 | 85 |
- |
||
Response Time |
TON |
Normal θ=Φ=0° |
- |
10 | 20 | msec |
TOFF |
- |
15 | 30 | msec | ||
Contrast ratio | CR | 600 | 800 |
- |
- |
|
Color Chromaticity |
WX | 0.26 | 0.31 | 0.36 |
- |
|
WY | 0.28 | 0.33 | 0.38 |
- |
||
Luminance | L | 280 | 350 |
- |
cd/m² | |
Luminance uniformity | YU | 75 | 80 |
- |
% |
Interface Connection:
Pin No. | Symbol | I/O | Function | Remark |
1 | VCOM | P | Common Voltage | |
2 | VDD | P | Power Supply | |
3 | VDD | P | Power Supply | |
4 | NC | --- | No connection | |
5 | NC | --- | No connection | |
6 | NC | --- | No connection | |
7 | GND | P | Ground | |
8 | Rxin0- | I | -LVDS Differential Data Input |
R0-R5, G0 |
9 | Rxin0+ | I | +LVDS Differential Data Input | |
10 | GND | P | Ground | |
11 | Rxin1- | I | -LVDS Differential Data Input |
G1~G5, B0,B1 |
12 | Rxin1+ | I | +LVDS Differential Data Input | |
13 | GND | P | Ground | |
14 | Rxin2- | I | -LVDS Differential Data Input | B2-B5,HS,VS, DE |
15 | Rxin2+ | I | +LVDS Differential Data Input | |
16 | GND | P | Ground | |
17 | RxCLK- | I | -LVDS Differential Clock Input |
LVDS CLK |
18 | RxCLK+ | I | +LVDS Differential Clock Input | |
19 | GND | P | Ground | |
20 | Rxin3- | I | -LVDS Differential Data Input |
R6, R7, G6, G7,B6, B7 |
21 | Rxin3+ | I | +LVDS Differential Data Input | |
22 | GND | P | Ground | |
23 | NC | --- | No connection | |
24 | NC | --- | No connection | |
25 | GND | P | Ground | |
26 | NC | --- | No connection |
27 | LED_PWM | O | CABC controller signal output for backlight | |
28 | NC | --- | No connection | |
29 | NC | --- | No connection | |
30 | GND | P | Ground | |
31 | LED- | P | LED Cathode | |
32 | LED- | P | LED Cathode | |
33 | NC | --- | No connection | |
34 | NC | --- | No connection | |
35 | NC | --- | No connection | |
36 | NC | --- | No connection | |
37 | CABC_EN | I | CABC Enable Input | |
38 | NC | --- | No connection | |
39 | LED+ | P | LED Anode | |
40 | LED+ | P | LED Anode |
Handling Precautions:
1.Store the module in a dark room where must keep at 25±10C and 65%RH or less.
2.Do not store the module in surroundings containing organic solvent or corrosive gas.
3.Store the module in an anti-electrostatic container or bag.