10.1 Inch IPS Lcd Display 1280x800 Lvds Interface 40 Pins EJ101IA-01G
General Description:
The EJ101IA-01G features an LVDS (1 ch, 8-bit) signal interface with a total of 40 pins with terminal connections and a drive screen voltage of 2.5/8.2/22/-7V (Typ.) (VDD/AVDD/VGH/VGL). It has a typical vertical refresh rate Fv of 60Hz.
Specifications:
No. | Item | Specification |
1 | LCD size | 10.1 inch(Diagonal) |
2 | Driver element | a-Si TFT active matrix |
3 | Resolution | 1280 × 3(RGB) × 800 |
4 | Display mode | Normally Black, Transmissive |
5 | Dot pitch | 0.0565(W) × 0.1695(H) mm |
6 | Active area | 216.96(W) × 135.60(H) mm |
7 | Module size | 229.46(W) ×149.1(H) ×2.50(D) mm |
8 | Surface treatment | HC |
9 | Color arrangement | RGB-stripe |
10 | Interface | Digital |
11 | Backlight power consumption | 1.76 W(Typ.) |
12 | Panel power consumption | 0.7W(Typ.) |
13 | Weight | 0.183KG(Typ.) |
14 | inversion | 1+2line |
15 | IC | HX8288*4&HX8695*1 |
Absolute Maximum Ratings:
Item |
Symbol |
Values |
Unit |
|
Min. | Max. | |||
Power voltage | VDD | -0.3 | 3.9 | V |
Operation Temperature | TOP | -10 | 50 | ℃ |
Storage Temperature | TST | -20 | 60 | ℃ |
LED Reverse Voltage | VR | 2.7 | 3.1 | V |
LED Forward Current | IF |
--- |
50 | mA |
Typical Operation Conditions:
Item |
Symbol |
Values |
Unit |
||
Min. | Typ. | Max. | |||
Power voltage | VDD | 2.3 | 2.5 | 2.7 | V |
Input signal voltage | VCOM | 2.7 | 3.0 | 3.3 | V |
Input logic high voltage | VIH | 0.8 VDD | / | 3.6 | V |
Input logic low voltage | VIL | 0 | / | 0.2DVDD | V |
Optical Specification:
Item |
Symbol |
Condition |
Values |
Unit |
||
Min. | Typ. | Max. | ||||
Viewing angle (CR≥ 10) |
θL | Φ=180°(9 o’clock) | 75 | 85 |
- |
degree |
θR |
Φ=0°(3 o’clock) | 75 | 85 |
- |
||
θT | Φ=90°(12 o’clock) | 75 | 85 |
- |
||
θB
|
Φ=270°(6 o’clock) | 75 | 85 |
- |
||
Response Time |
TON |
Normal θ=Φ=0° |
- |
10 | 20 | msec |
TOFF |
- |
15 | 30 | msec | ||
Contrast ratio | CR | 600 | 800 |
- |
- |
|
Color Chromaticity |
WX | 0.26 | 0.31 | 0.36 |
- |
|
WY | 0.28 | 0.33 | 0.38 |
- |
||
Luminance | L | 280 | 350 |
- |
cd/m² | |
Luminance uniformity | YU | 75 | 80 |
- |
% |
Interface Connection:
Pin No. | Symbol | I/O | Function | Remark |
1 | VCOM | P | Common Voltage | |
2 | VDD | P | Power Supply | |
3 | VDD | P | Power Supply | |
4 | NC | --- | No connection | |
5 | NC | --- | No connection | |
6 | NC | --- | No connection | |
7 | GND | P | Ground | |
8 | Rxin0- | I | -LVDS Differential Data Input |
R0-R5, G0 |
9 | Rxin0+ | I | +LVDS Differential Data Input | |
10 | GND | P | Ground | |
11 | Rxin1- | I | -LVDS Differential Data Input |
G1~G5, B0,B1 |
12 | Rxin1+ | I | +LVDS Differential Data Input | |
13 | GND | P | Ground | |
14 | Rxin2- | I | -LVDS Differential Data Input | B2-B5,HS,VS, DE |
15 | Rxin2+ | I | +LVDS Differential Data Input | |
16 | GND | P | Ground | |
17 | RxCLK- | I | -LVDS Differential Clock Input |
LVDS CLK |
18 | RxCLK+ | I | +LVDS Differential Clock Input | |
19 | GND | P | Ground | |
20 | Rxin3- | I | -LVDS Differential Data Input |
R6, R7, G6, G7,B6, B7 |
21 | Rxin3+ | I | +LVDS Differential Data Input | |
22 | GND | P | Ground | |
23 | NC | --- | No connection | |
24 | NC | --- | No connection | |
25 | GND | P | Ground | |
26 | NC | --- | No connection |
27 | LED_PWM | O | CABC controller signal output for backlight | |
28 | NC | --- | No connection | |
29 | NC | --- | No connection | |
30 | GND | P | Ground | |
31 | LED- | P | LED Cathode | |
32 | LED- | P | LED Cathode | |
33 | NC | --- | No connection | |
34 | NC | --- | No connection | |
35 | NC | --- | No connection | |
36 | NC | --- | No connection | |
37 | CABC_EN | I | CABC Enable Input | |
38 | NC | --- | No connection | |
39 | LED+ | P | LED Anode | |
40 | LED+ | P | LED Anode |
Handling Precautions:
1.Only use a soft sloth with IPA to wipe the polarizer, other chemicals might permanent damage to the polarizer.
2.Transparent electrodes may be disconnected if you use the LCD panel under environmental conditions where the condensation of dew occurs.