7 Inch 1024x600 Tft Lcd Display With Lvds Interface 40 Pins 280 Nits Brightness
General Description:
WY700TN40-24 is 7.0 inch 1024*600 TFT LCD Screen Display Panel Without Touch Screen,As a TN, normal Black display, transmissive LCD module product, the WY700TN40-24 offers a display brightness of 280 cd/m², a transmissive contrast ratio of 500:1, and a viewing angle of 70/70/60/45 (Typ.)(CR≥10)(L/R/U/D), with an optimal viewing angle of 6 o'clock, and a response time of 30 ( Typ.)(Tr/Td) ms.
Specifications:
Item |
Contents |
Unit |
LCD | ||
LCD Type | TFT / Transmissive / Normally Black |
-- |
Viewing direction | 6 O'clock | -- |
Backlight | White LED x 24 | -- |
Interface | LVDS interface | -- |
Outline Dimension (lcm) | 164.0W) ×103.0(H) × 3.5 (T) | mm |
Glass area (W×H×T) | 161.4 × 99.6 × 1.0 | mm |
Active area (W×H) | 153.61 ×90.0 | mm |
Number of Dots | 1024(RGB) ×600 | -- |
Dot pitch (W×H) | 0.05 × 0.15 | mm |
Pixel pitch (W×H) | 0.15 × 0.15 | mm |
Operating Temperature | -10 ~ +50 | ℃ |
Storage temperature | -20 ~ +60 | ℃ |
Polarizer |
Top: 45度film |
-- |
Bottom: 45度film |
Absolute Maximum Ratings:
Item | Symbol | Rating | Unit |
Digital Supply Voltage | VDD | -0.3 to +3.96 | V |
Operating Temperature range | TOP | -10 to +50 | ℃ |
Storage Temperature range | TST | -20 to +60 | ℃ |
Electrical Specifications:
Item | Symbol | Min. | Type. | Max. | Unit |
Digital Power Supply Voltage | VDD | 3.0 | 3.3 | 3.6 | V |
Analog Supply Voltage | AVDD | 8.4 | 9.6 | 10.0 | V |
Gate On Voltage | VGH | 17 | 18 | 19 | V |
Gate Off Voltage | VGL | -9 | -8 | -7 | V |
Common Voltage | VCOM | 2.4 | 3.0 | 3.6 | V |
Backlight Electrical Specifications:
Item | Symbol | Condition | Min | Typ | Max | Unit |
Forward Voltage | VF | IF=160mA | - | 9.6 | - | V |
Uniformity | △Bp | - | 80 | - | - | % |
LCM Luminance | Lv | IF=16mA | 280 | - | cd/m2 |
Interface Connection:
PIN No. |
SYMBOL |
Function |
1 | VCOM | Common voltage |
2-3 | VDD | Digital power |
3 | VDD | Digital power |
5 |
RESET |
Global reset pin. Active low to enter reset state. Suggest to connecting with an RC reset circuit for stability.Normally pull high. (R=10KΩ, C=0.1μF) |
6 |
STBYB |
Standby mode, normally pull high STBYB=”1”, normal operation STBYB=”0”,timing control, source driver will turn off, all output are high-Z |
7 | GND | Ground |
8 | RXIN0- | Negative LVDS differential data inputs |
9 | RXIN0+ | Positive LVDS differential data inputs |
10 | GND | Ground |
11 | RXIN1- | Negative LVDS differential data inputs |
12 | RXIN1+ | Positive LVDS differential data inputs |
13 | GND | Ground |
14 | RXIN2- | Negative LVDS differential data inputs |
15 | RXIN2+ | Positive LVDS differential data inputs |
16 | GND | Ground |
17 | RXCLKIN- | Negative LVDS differential clock inputs |
18 | RXCLKIN+ | Positive LVDS differential clock inputs |
19 | GND | Ground |
20 | RXIN3- | Negative LVDS differential data inputs |
21 | RXIN3+ | Positive LVDS differential data inputs |
22 | GND | Ground |
23-24 | NC | NC |
25 | GND | Ground |
26 | NC | NC |
27 | DIMO | Backlight CABC controller signal output |
28 | SELB |
6bit/8bit mode select H : 6bit / L : 8bit |
29 | AVDD | Power for Analog Circuit |
30 | GND | Ground |
31-32 | LED K | LED Cathode |
33 | L/R | Horizontal inversion |
34 | U/D | Vertical inversion |
35 | VGL | Negative power for TFT |
36-37 | GND | Ground |
38 | VGH | Positive power for TFT |
39-40 | LED A | LED Anode |
Handling Precautions:
1.Since a module is composed of electronic circuits, it is not strong to electrostatic discharge. Make certain that treatment persons are connected to ground through wrist band etc.
2.Avoid the use work clothing made of synthetic fibers. We recommend cotton clothing or other conductivity-treated fibers.