15.6 Inch Tft Lcd Display 1920x1080 All Viewing Angle Edp Interface 30 Pins
General Description:
NV156FHM-N69 voltage supply 3.3V (Typ.), frame rate 60Hz, operating temperature: 0 ~ 50 °C; storage temperature: -20 ~ 60 °C, interface type 30 pins eDP, light source type WLED [10S6P] , 15K hours, LED driver included.
Features:
1.2 lane eDP interface with 2.7Gbps link rates
2.Thin and light weight
3.16.2M(6bits+FRC) color depth, color gamut sRGB 100%
4.Single LED lighting bar (Bottom side/Horizontal Direction)
5.Data enable signal mode
6.Side mounting frame
7.Green product (RoHS & Halogen free product)
8.On board LED driving circuit
9.Low driving voltage and low power consumption
10.On board EDID chip
11.Adjust backlight brightness with DC mode
Specifications:
Parameter | Specification | Unit |
Active area | 344.16(H) × 193.59(V) | mm |
Number of pixels | 1920 (H) × 1080 (V) | pixels |
Pixel pitch | 179.25(H) × 179.25(V) | um |
Pixel arrangement | RGB Vertical stripe | |
Display colors | 16.2M(6bits+FRC) | |
Color gamut | sRGB 100% | |
Display mode | Normally Black | |
Dimensional outline |
350.66± 0.3 (H)*204.04± 0.3(V)(W/O PCB)*2.6 (Max) 350.66±0.3(H)*211.54±0.5(V) (W/PCB)*2.6 (Max) | mm |
Weight | 280(max) | g |
Surface treatment | Anti-Glare | |
Surface hardness | 3H | |
Back-light | Bottom edge side, 1-LED lighting bar type | |
Power consumption |
PD : 0.75(Max.) | W |
PBL : 3.3(Max.) | W | |
PTotal : 4.05(Max.) | W |
Absolute Maximum Ratings:
Parameter | Symbol | Min. | Max. | Unit |
Power Supply Voltage |
VDD |
-0.3 | 4.0 | V |
eDP input Voltage | VeDP | 0 | 2.0 | V |
Logic Supply Voltage |
VIN |
VSS-0.3 | VDD+0.3 | V |
Operating Temperature |
TOP |
0 | +50 | °C |
Storage Temperature |
TST |
-20 | +60 | °C |
Electrical Specifications:
Parameter | Min. | Typ. | Max. | Unit | ||
Power Supply Voltage | VDD | 3.0 | 3.3 | 3.6 | V | |
Permissible Input Ripple Voltage |
VRF |
-10% VDD |
- |
+10% VDD |
V |
|
BIST Control Level |
High Level |
1.44 |
- |
3.3 | V | |
Low Level |
0 |
- |
0.27 | V | ||
Power Supply Inrush Current | Inrush | - | - | 2 | A | |
Power Supply Current | Mosaic |
DD |
- | - | 228 | mA |
RGB | - | - | 334 | mA | ||
Power Consumption |
Mosaic | PM | - | - | 0.75 | W |
RGB | PRGB | - | - | 1.1 | W | |
BLU | PBL | - | - | 3.3 | W | |
Total | PTotal | - | - | 4.05 | W |
Optical Specification:
Parameter | Symbol | Condition | Min. | Typ. | Max. | Unit | |
Viewing AngleRange |
Horizontal |
Θ3 |
CR > 10 |
- | 85 | - | Deg. |
Θ9 |
- | 85 | - | Deg. | |||
Vertical |
Θ12 |
- | 85 | - | Deg. | ||
Θ6 |
- | 85 | - | Deg. | |||
Luminance Contrast Ratio | CR | Θ = 0. | 1000 | 1200 | - | ||
Luminance of White | 5 Points |
Yw |
Θ = 0. ILED = 16.7mA |
255 | 300 | 375 | cd/m2 |
White Luminance Uniformity | 5 Points | ΔY5 | 80 | - | - | % | |
13 Points | ΔY13 | 60 | - | - | % | ||
White Chromaticity |
Wx |
Θ = 0. | 0.283 | 0.313 | 0.343 | ||
Wy |
0.299 | 0.329 | 0.359 | ||||
Reproduction of Color |
Red |
Rx |
Θ = 0. |
Typ.-0.03 |
0.646 |
Typ.+0.03 |
|
R | 0.335 | ||||||
Green |
Gx |
0.311 | |||||
Gy |
0.624 | ||||||
Blue |
Bx |
0.154 | |||||
By |
0.059 | ||||||
Color Gamut(sRGB Match@1931) |
95 | 100 | - | % | |||
Response Time (Rising + Falling) | TRT |
Ta= 25C Θ = 0. |
- |
20 | 25 | ms | |
Cross Talk | CT | Θ = 0. | - | - | 2.0 | % |
Interface Connection:
Terminal | Symbol | Functions |
Pin No. | Symbol | Description |
1 | NC | No Connection |
2 | H_GND | Ground |
3 | LANE1_N | eDP RX Channel 1 Negative |
4 | LANE1_P | eDP RX Channel 1 Positive |
5 | H_GND | Ground |
6 | LANE0_N | eDP RX Channel 0 Negative |
7 | LANE0_P | eDP RX Channel 0 Positive |
8 | H_GND | Ground |
9 | AUX_CH_P | eDP AUX CH Positive |
10 | AUX_CH_N | eDP AUX CH Negative |
11 | H_GND | Ground |
12 | LCD_VCC | Power Supply, 3.3V (typ.) |
13 | LCD_VCC | Power Supply, 3.3V (typ.) |
14 | BIST | Panel Self Test Enable |
15 | H_GND | Ground |
16 | H_GND | Ground |
17 | HPD | Hot Plug Detect Output |
18 | BL_GND | LED Ground |
19 | BL_GND | LED Ground |
20 | BL_GND | LED Ground |
21 | BL_GND | LED Ground |
22 | BL_ENABLE | LED Enable Pin(+3.3V Input) |
23 | BL_PWM | System PWM Signal Input |
24 | NC | No Connection |
25 | NC | No Connection |
26 | BL_POWER | LED Power Supply 5V-21V |
27 | BL_POWER | LED Power Supply 5V-21V |
28 | BL_POWER | LED Power Supply 5V-21V |
29 | BL_POWER | LED Power Supply 5V-21V |
30 | NC | No Connection |
Handling Precautions:
1.When the module is operating, do not lose CLK, ENAB signals. If any one of these signals is lost, the LCD panel would be damaged.
2.Obey the supply voltage sequence. If wrong sequence is applied, the module would be damaged.