15.6 Inch Tft Display 1920x1080 All Viewing Angle Edp Interface 30 Pins
General Description:
The NV156FHM-N69 features an eDP (2 Lanes) signal interface with a total of 30 pins with terminal connections and a drive screen voltage of 3.3V (Typ.). It has a typical vertical refresh rate Fv of 60Hz.
Features:
1.2 lane eDP interface with 2.7Gbps link rates
2.Thin and light weight
3.16.2M(6bits+FRC) color depth, color gamut sRGB 100%
4.Single LED lighting bar (Bottom side/Horizontal Direction)
5.Data enable signal mode
6.Side mounting frame
7.Green product (RoHS & Halogen free product)
8.On board LED driving circuit
9.Low driving voltage and low power consumption
10.On board EDID chip
11.Adjust backlight brightness with DC mode
Specifications:
Parameter | Specification | Unit |
Active area | 344.16(H) × 193.59(V) | mm |
Number of pixels | 1920 (H) × 1080 (V) | pixels |
Pixel pitch | 179.25(H) × 179.25(V) | um |
Pixel arrangement | RGB Vertical stripe | |
Display colors | 16.2M(6bits+FRC) | |
Color gamut | sRGB 100% | |
Display mode | Normally Black | |
Dimensional outline |
350.66± 0.3 (H)*204.04± 0.3(V)(W/O PCB)*2.6 (Max) 350.66±0.3(H)*211.54±0.5(V) (W/PCB)*2.6 (Max) | mm |
Weight | 280(max) | g |
Surface treatment | Anti-Glare | |
Surface hardness | 3H | |
Back-light | Bottom edge side, 1-LED lighting bar type | |
Power consumption |
PD : 0.75(Max.) | W |
PBL : 3.3(Max.) | W | |
PTotal : 4.05(Max.) | W |
Absolute Maximum Ratings:
Parameter | Symbol | Min. | Max. | Unit |
Power Supply Voltage |
VDD |
-0.3 | 4.0 | V |
eDP input Voltage | VeDP | 0 | 2.0 | V |
Logic Supply Voltage |
VIN |
VSS-0.3 | VDD+0.3 | V |
Operating Temperature |
TOP |
0 | +50 | °C |
Storage Temperature |
TST |
-20 | +60 | °C |
Electrical Specifications:
Parameter | Min. | Typ. | Max. | Unit | ||
Power Supply Voltage | VDD | 3.0 | 3.3 | 3.6 | V | |
Permissible Input Ripple Voltage |
VRF |
-10% VDD |
- |
+10% VDD |
V |
|
BIST Control Level |
High Level |
1.44 |
- |
3.3 | V | |
Low Level |
0 |
- |
0.27 | V | ||
Power Supply Inrush Current | Inrush | - | - | 2 | A | |
Power Supply Current | Mosaic |
DD |
- | - | 228 | mA |
RGB | - | - | 334 | mA | ||
Power Consumption |
Mosaic | PM | - | - | 0.75 | W |
RGB | PRGB | - | - | 1.1 | W | |
BLU | PBL | - | - | 3.3 | W | |
Total | PTotal | - | - | 4.05 | W |
Optical Specification:
Parameter | Symbol | Condition | Min. | Typ. | Max. | Unit | |
Viewing AngleRange |
Horizontal |
Θ3 |
CR > 10 |
- | 85 | - | Deg. |
Θ9 |
- | 85 | - | Deg. | |||
Vertical |
Θ12 |
- | 85 | - | Deg. | ||
Θ6 |
- | 85 | - | Deg. | |||
Luminance Contrast Ratio | CR | Θ = 0. | 1000 | 1200 | - | ||
Luminance of White | 5 Points |
Yw |
Θ = 0. ILED = 16.7mA |
255 | 300 | 375 | cd/m2 |
White Luminance Uniformity | 5 Points | ΔY5 | 80 | - | - | % | |
13 Points | ΔY13 | 60 | - | - | % | ||
White Chromaticity |
Wx |
Θ = 0. | 0.283 | 0.313 | 0.343 | ||
Wy |
0.299 | 0.329 | 0.359 | ||||
Reproduction of Color |
Red |
Rx |
Θ = 0. |
Typ.-0.03 |
0.646 |
Typ.+0.03 |
|
R | 0.335 | ||||||
Green |
Gx |
0.311 | |||||
Gy |
0.624 | ||||||
Blue |
Bx |
0.154 | |||||
By |
0.059 | ||||||
Color Gamut(sRGB Match@1931) |
95 | 100 | - | % | |||
Response Time (Rising + Falling) | TRT |
Ta= 25C Θ = 0. |
- |
20 | 25 | ms | |
Cross Talk | CT | Θ = 0. | - | - | 2.0 | % |
Interface Connection:
Terminal | Symbol | Functions |
Pin No. | Symbol | Description |
1 | NC | No Connection |
2 | H_GND | Ground |
3 | LANE1_N | eDP RX Channel 1 Negative |
4 | LANE1_P | eDP RX Channel 1 Positive |
5 | H_GND | Ground |
6 | LANE0_N | eDP RX Channel 0 Negative |
7 | LANE0_P | eDP RX Channel 0 Positive |
8 | H_GND | Ground |
9 | AUX_CH_P | eDP AUX CH Positive |
10 | AUX_CH_N | eDP AUX CH Negative |
11 | H_GND | Ground |
12 | LCD_VCC | Power Supply, 3.3V (typ.) |
13 | LCD_VCC | Power Supply, 3.3V (typ.) |
14 | BIST | Panel Self Test Enable |
15 | H_GND | Ground |
16 | H_GND | Ground |
17 | HPD | Hot Plug Detect Output |
18 | BL_GND | LED Ground |
19 | BL_GND | LED Ground |
20 | BL_GND | LED Ground |
21 | BL_GND | LED Ground |
22 | BL_ENABLE | LED Enable Pin(+3.3V Input) |
23 | BL_PWM | System PWM Signal Input |
24 | NC | No Connection |
25 | NC | No Connection |
26 | BL_POWER | LED Power Supply 5V-21V |
27 | BL_POWER | LED Power Supply 5V-21V |
28 | BL_POWER | LED Power Supply 5V-21V |
29 | BL_POWER | LED Power Supply 5V-21V |
30 | NC | No Connection |
Handling Precautions:
1.Protection film for polarizer on the module shall be slowly peeled offjust before use so that the electrostatic charge can be minimized.
2.Pins of connector shall not be touched directly with bare hands.