10.1 Inch Tft Display 1280x800 With Lvds Interface 45 Pins BP101WX1-300
General Description:
The typical features of BP101WX1-300 are: white LED backlight, flip-flop terminals, and mirror surface. Based on its characteristics, this model is recommended for applications such as tablet PCs.
Specifications:
Parameter | Specification | Unit | Remarks |
Active area | 216.96(H) x 135.6(V) | mm | |
Number of pixels | 1280(H) × 800(V) | pixels | |
Pixel pitch | 0.1695 (H) X0.1695 (V)× RGB | mm | |
Pixel arrangement | Pixels RGB stripe arrangement | ||
Display colors | 16777216(8bits ) | colors | |
Display mode | Transmission mode, Normally Black | ||
Outline Dimension | 228.21(H)*148.86(V)*2 .39(D) typ. | mm | Tolerance:± 0.2 |
Weight | 145 (max) | gram | |
Surface Treatment | Hard Coating, 3H, Low Reflection (Front Polarizer) | ||
Back-light | Bottom edge side, 1-LED Lighting bar type | 40*LED Array |
Absolute Maximum Ratings:
Parameter | Symbol | Min. | Typ. | Max. | Unit |
Power Supply Voltage (LCD Module) | VDD | 3 | 3.3 | 3.6 | V |
Back-light Power Supply Voltage | HVDD | - | 31 | 34 | V |
Back-light LED Current | I LED | - | 76 | 80 | mA |
Back-light LED Reverse Voltage | VR | - | - | 5 | V |
Operating Temperature | TOP | -20 | - | +65 | ℃ |
Storage Temperature | TST | -40 | - | +80 | ℃ |
Electrical Specifications:
Parameter | Symbol | Values | Unit | Notes | ||
Min | Typ | Max | ||||
Power Supply Input Voltage | VDD | 3.0 | 3.3 | 3.6 | V | - |
Power Supply Current | IDD | - | - | 260 | mA | |
Back-Light Power Supply Voltage | HvDD | - | 31 | - | V | |
Back-Light Power Supply Current | IHVDD | - | 76 | - | mA | |
Positive-going Input Threshold Voltage | VIT+ |
- |
- |
+100 | mV |
Vcom = 1.2V typ. |
Negative-going Input Threshold Voltage |
VIT- | - 100 |
- |
- |
mV | |
Differential input common mode voltage |
Vcom |
- |
1.2 |
- |
V | VIH=100mV, VIL=- 100mV |
Power Consumption |
PD | - | - | 0.85 | W | |
PBL | - | - | 2.7 | W | ||
PTotal | - | - | 3.55 | W |
Interface Connection:
Pin | Symbol | Functions | Pin | Symbol | Functions |
1 | GND1 | Ground | 24 | RXin1N |
-LVDS differential data (G1-G5, B0-B1) |
2 | ID_CHK | ID_CHK | 25 | RXin1P |
+LVDS differential data (G1-G5, B0-B1) |
3 | NC1 | No connection | 26 | GND8 | Ground |
4 | 3.3V | Logic power 3.3V | 27 | RXin0N |
-LVDS differential data (R0-R5, G0) |
5 | 3.3V | Logic power 3.3V | 28 | RXin0P |
+LVDS differential data (R0-R5, G0) |
6 | 3.3V | Logic power 3.3V | 29 | GND9 | Ground |
7 | 3.3V | Logic power 3.3V | 30 | GND10 | Ground |
8 | 3.3V | Logic power 3.3V | 31 | NC2 | No connection |
9 | WPN | No connection | 32 | FB1 | LED FB1 |
10 | SCL | No connection | 33 | FB2 | LED FB2 |
11 | SDA | No connection | 34 | FB3 | LED FB3 |
12 | GND2 | Ground | 35 | FB4 | LED FB4 |
13 | GND3 | Ground | 36 | FB5 | No connection |
14 | GND4 | Ground | 37 | FB6 | No connection |
15 | RXin3N | -LVDS differential data (R6,R7,G6,G6,B6,B7) | 38 | NC3 | No connection |
16 | RXin3P |
+LVDS differential data (R6,R7,G6,G6,B6,B7) |
39 | VLED1 | LED Power supply Voltage |
17 | GND5 | Ground | 40 | VLED2 | LED Power supply Voltage |
18 | LVDS_RX_N | - LVDS differential clock input | 41 | VLED3 | LED Power supply Voltage |
19 | LVDS_RX_P | + LVDS differential clock input | 42 | VLED4 | LED Power supply Voltage |
20 | GND6 | Ground | 43 | VLED5 | LED Power supply Voltage |
21 | RXin2N | -LVDS differential data (B2-B5, HS, VS, DE) | 44 | NC4 | No connection |
22 | RXin2P | +LVDS differential data (B2-B5, HS, VS, DE) | 45 | GND11 | Ground |
23 | GND7 | Ground |
Optical Specification:
Parameter | Symbol | Condition | Min. | Typ. | Max. | Unit | |||
Viewing Angle range | Horizontal | Θ3 |
CR > 10 |
80 | 89 | - | Deg. | ||
Θ9 | 80 | 89 | - | Deg. | |||||
Vertical |
Θ12 |
80 | 89 | - | Deg. | ||||
Θ6 | 80 | 89 | - | Deg. | |||||
Color Gamut | - | 50 | - | % | |||||
Luminance Contrast ratio | CR | Θ = 0° | 720 | 900 | - | ||||
Luminace of White |
Center | Yw |
Θ = 0° |
400 | 450 |
- |
cd/m2 | ||
White Luminance unifomity |
9 Points |
△Y9 |
80 |
90 |
- |
% | |||
White Balance |
Color Temp |
Θ = 0° | 6000 | 7000 | 8000 | K | |||
Reproduction of color |
White |
Wx |
Θ = 0° |
Typ.-0.03 |
0.304 |
Typ.+0.03 |
|||
Wy |
0.333 | ||||||||
Red |
Rx |
0.601 | |||||||
Ry |
0.347 | ||||||||
Green |
Gx |
0.322 | |||||||
Gy |
0.580 | ||||||||
Blue |
Bx |
0.147 | |||||||
By | 0.126 | ||||||||
Response Time (Rising+Falling) | TRT | Ta= 25℃ Θ=0° | - | 25 | - | ms | |||
Gray Scale | Gamma | Θ = 0° | 2.35 | 2.6 | 2.85 |
Handling Precautions:
1.As the surface of the polarizer is very soft and easily scratched, use a soft dry cloth without chemicals for cleaning.
2.When the module is operating, do not lose CLK, ENAB signals . If any one of these signals is lost, the LCD panel would be damaged.