36.6 Inch Bar Type Tft 1920x290 Ips Viewing Angle Lvds Interface 51 Pins
General Description:
Typical features of the DV366FBM-N10 are: landscape mode / portrait mode, high brightness, white LED backlight, life time > 50,000 hours, ultra wide screen, matte surface. Its operating temperature is 0 ~ 50°C, storage temperature is -20 ~ 60°C, and vibration resistance is 1.5G (14.7 m/s²).
Specifications:
Parameter | Specification | Unit | Remarks |
Active area | 919.3(H) × 138.85 (V) | mm | |
Number of pixels | 1920(H) × 290(V) | pixels | |
Pixel pitch | 159.6(H) × 478.8(V) | um | |
Pixel arrangement | Pixels RGB Vertical stripe | ||
Display colors | 16.7M | colors | 8bits True |
Display mode | Normally Black | ||
Dimensional outline | 960(H)*174.35(V)*16.9(B) | mm | Detail refer to drawing |
Weight | 3260 | g | |
Power Consumption | 5.4 | Watt | Typ. |
Bezel width (L/R/U/D) | 17.85/17.85/15.25/15.25 | mm | |
Surface Treatment | Haze 1% | ||
Back-light | Down edge side, 2- LED Light bar | ||
Possible display type | Landscape and Portrait Enabled |
Absolute Maximum Ratings:
Parameter | Symbol | Min. | Max. | Unit | Remark |
Power Supply Voltage | VDD | VSS-0.3 | 13.5 | V | Ta = 25 ℃ |
Operating Temperature | TOP | 0 | +50 | ℃ |
|
Storage Temperature |
TSUR |
-20 | +60 | ℃ | |
TST |
-20 | +60 | ℃ | ||
Operating Ambient Humidity |
Hop | 10 | 80 | %RH | |
Storage Humidity | Hst | 10 | 80 | %RH |
Electrical Specifications:
Parameter | Symbol | Values | Unit | |||
Min | Typ | Max | ||||
Power Supply Input Voltage | VDD | 10.8 | 12 | 13.2 | Vdc | |
Power Supply Ripple Voltage | VRP | - | - | 300 | mV | |
Power Supply Current | IDD | - | 450 | 600 | mA | |
Power Consumption | PDD | - | 5.4 | 8 | Watt | |
Rush current | IRUSH | - | 3.0 | A | ||
LVDS Interface |
Differential Input High Threshold Voltage | VLVTH | +100 |
- |
+300 | mV |
Differential Input Low Threshold Voltage |
VLVTL | -300 |
- |
-100 | mV | |
Input Differential Voltage | | VID | | 200 | - | 600 | mV | |
Common Input Voltage |
VLVC |
0.6 |
1.2 |
2.4- |VID |/2 |
V |
|
CMOS Interface |
Input High Threshold Voltage | VIH | 2.7 |
- |
3.3 | |
Input Low Threshold Voltage |
VIL | 0 |
- |
0.6 | V |
Interface Connection:
Pin No | Symbol | Description | Pin No | Symbol | Description |
1 | GND | Ground | 16 | ERX2- | Even pixel Negative LVDS differential data input. |
2 | SCL | I2C Clock | 17 | ERX2+ | Even pixel Negative LVDS differential data input. |
3 | SDA | I2C Data | 18 | GND | Ground |
4 | NC | No Connection | 19 | ECLK- | Even pixel Negative LVDS differential clock input. |
5 | NC | No Connection | 20 | ECLK+ | Even pixel Negative LVDS differential clock input. |
6 | NC | No Connection | 21 | GND | Ground |
7 | SELLVDS | LVDS data format selection | 22 | ERX3- | Even pixel Negative LVDS differential data input. |
8 | NC | No Connection | 23 | ERX3+ | Even pixel Negative LVDS differential data input. |
9 | NC | No Connection | 24 | NC | No Connection |
10 | NC | No Connection | 25 | NC | No Connection |
11 | GND | Ground | 26 | GND | Ground |
12 | ERX0- |
Even pixel Negative LVDS diffe rential data input. |
27 | GND | Ground |
13 | ERX0+ | Even pixel Negative LVDS differential data input. | 28 | ORX0- | Odd pixel Negative LVDS differential data input. |
14 | ERX1- | Even pixel Negative LVDS differential data input. | 29 | ORX0+ | Odd pixel Negative LVDS differential data input. |
15 | ERX1+ | Even pixel Negative LVDS differential data input. | 30 | ORX1- | Odd pixel Negative LVDS differential data input. |
31 | ORX1+ | Odd pixel Negative LVDS differential data input. | 42 | GND | Ground |
32 | ORX2- | Odd pixel Negative LVDS differential data input. | 43 | GND | Ground |
33 | ORX2+ | Odd pixel Negative LVDS differential data input. | 44 | GND | Ground |
34 | GND | Ground | 45 | GND | Ground |
35 | OCLK- | Odd pixel Negative LVDS differential clock input. | 46 | GND | Ground |
36 | OCLK+ | Odd pixel Negative LVDS differential clock input. | 47 | NC | No Connection |
37 | GND | Ground | 48 | VCC | +12V |
38 | ORX3- | Odd pixel Negative LVDS differential data input. | 49 | VCC | +12V |
39 | ORX3+ | Odd pixel Negative LVDS differential data input. | 50 | VCC | +12V |
40 | NC | No Connection | 51 | VCC | +12V |
41 | NC | No Connection |
Optical Specification:
Parameter | Symbol | Condition | Min | Typ | Max | Unit | ||
Viewing Angle |
Horizontal |
Θ3 |
CR > 10 |
80 | 89 | - | Deg. | |
Θ9 | 80 | 89 | - | Deg. | ||||
Vertical |
Θ12 | 80 | 89 | - | Deg. | |||
Θ6 | 80 | 89 | - | Deg. | ||||
Brightness | Lv |
Θ=0° (Center) Normal Viewing Angle |
560 | 700 | - | nit | ||
Contrast ratio | CR | 800:1 | 1200:1 | - | ||||
White Iuminance uniformity | ΔY | 75 |
- |
- |
% | |||
Reproduction of color |
White |
Wx |
TYP. - 0.03 |
0.289 |
TYP. + 0.03 |
|||
Wy |
0.332 | |||||||
Red |
Rx |
0.650 | ||||||
Ry |
0.341 | |||||||
Green |
Gx |
0.304 | ||||||
Gy |
0.625 | |||||||
Blue |
Bx |
0.148 | ||||||
By |
0.071 | |||||||
Color Gamut | 70 | 72 | - | % | ||||
Response Time | G to G | Tg | - | 8 | 10 | ms |
Handling Precautions:
1.Be careful for condensation at sudden temperature change. Condensation makes damage to polarizer or electrical contacted parts. And after fading condensation, smear or spot will occur.
2.Obey the supply voltage sequence. If wrong sequence is applied, the module would be damaged.