47.1 Inch Bar Type Tft 3840x160 Ips Viewing Angle Lvds Interface 51 Pins
General Description:
The DV471FBM-N10 display resolution is 3840 (RGB) x 160, aspect ratio is >3:1 (W:H), and pixels are arranged in vertical RGB stripes. Its display area size is 1196.16 x 49.84 (W x H) mm, and its exterior size is 1209 x 62.9 (W x H) x 14.5 (D) mm, with a matte finish (Haze 25%).
Specifications:
Parameter | Specification | Unit | Remarks |
Active area | 1196. 16(H) × 49.84 (V) | mm | |
Number of pixels | 3840(H) × 160(V) | pixels | 1Pixel=(R+G+B) Dot |
Pixel pitch | 311.5(H) × 311.5(V) | um | R/G:103.83, B:103.84 |
Pixel arrangement | Pixels RGB Vertical stripe | ||
Display colors | 16.7M | colors | 8bits True |
Display mode | Normally Black | ||
Dimensional outline | 1209(H)*62.9(V)*14.5(B) | mm | |
Weight | TBD | g | |
Power Consumption | 17W | Watt | Estimate: 6.5W for P anel, 10.5W for BLU |
Bezel width (L/R/U/D) | 5.4/5.4/5.2/6.8 | mm | |
Surface Treatment | Haze 25% | ||
Back-light | Horizontal arranged, 2-LED Lighting Bar type |
Absolute Maximum Ratings:
Parameter | Symbol | Min. | Max. | Unit | Remark |
Power Supply Voltage |
VDD | VSS-0.3 | 13.2 | V |
Ta = 25 ℃ |
VBL | VSS-0.3 | 13.2 | V | ||
Operating Temperature | TOP | 0 | +50 | ℃ |
|
Storage Temperature |
TSUR |
-20 | +60 | ℃ | |
TST |
-20 | +60 | ℃ | ||
Operating Ambient Humidity | Hop | 10 | 80 | %RH | |
Storage Humidity | Hst | 10 | 80 | %RH |
Electrical Specifications:
Parameter | Symbol | Values | Unit | |||
Min | Typ | Max | ||||
Power Supply Input Voltage | VDD | 10.8 | 12 | 13.2 | Vdc | |
Power Supply Ripple Voltage | VRP | 300 | mV | |||
Power Supply Current | IDD | - | 542 | 1000 | mA | |
Power Consumption | PDD | 6.5 | 13.2 | Watt | ||
Rush current |
IRUSH |
- |
10 |
A |
||
V-by-One Interface |
Differential Input High Threshold Voltage | VLVTH |
- |
- |
+50 | mV |
Differential Input Low Threshold Voltage |
VLVTL | -50 |
- |
- |
mV | |
CMOS Interface |
Input High Threshold Voltage |
VIH | 2.0 |
- |
3.3 | |
Input Low Threshold Voltage |
VIL | 0 |
- |
0.8 | V |
Interface Connection:
Pin No | Description | Pin No | Description |
1 | VDD _12V | 16 | NC, For BOE Internal use |
2 | VDD _12V | 17 | NC, For BOE Internal use |
3 | VDD _12V | 18 | NC, For BOE Internal use |
4 | VDD _12V | 19 | NC, For BOE Internal use |
5 | VDD _12V | 20 | NC |
6 | VDD _12V | 21 | NC |
7 | VDD _12V | 22 | SEL-Section |
8 | VDD _12V | 23 | NC |
9 | NC | 24 | GND |
10 | GND | 25 | HTPDN |
11 | GND | 26 | LOCKN |
12 | GND | 27 | GND |
13 | GND | 28 | Rx0n |
14 | NC, For BOE Internal use | 29 | Rx0p |
15 | NC, For BOE Internal use | 30 | GND |
31 | Rx1n | 42 | GND |
32 | Rx1p | 43 | Rx5n |
33 | GND | 44 | Rx5p |
34 | Rx2n | 45 | GND |
35 | Rx2p | 46 | Rx6n |
36 | GND | 47 | Rx6p |
37 | Rx3n | 48 | GND |
38 | Rx3p | 49 | Rx7n |
39 | GND | 50 | Rx7p |
40 | Rx4n | 51 | GND |
41 | Rx4p |
Optical Specification:
Parameter | Symbol | Condition | Min | Typ | Max | Unit | ||
Viewing Angle |
Horizontal |
Θ3 |
CR > 10 |
85 | 89 | - | Deg. | |
Θ9 | 85 | 89 | - | Deg. | ||||
Vertical |
Θ12 | 85 | 89 | - | Deg. | |||
Θ6 | 85 | 89 | - | Deg. | ||||
Brightness | Lv |
Θ=0° (Center) Normal Viewing Angle |
400 | 500 | - | nit | ||
Contrast ratio | CR | 700:1 | 1000:1 | - | ||||
White Iuminance uniformity | ΔY | 75 |
- |
- |
% | |||
Reproduction of color |
White |
Wx |
-0.03 |
0.313 |
+0.03 |
|||
Wy |
0.329 | |||||||
Red |
Rx |
TBD | ||||||
Ry |
TBD | |||||||
Green |
Gx |
TBD | ||||||
Gy |
TBD | |||||||
Blue |
Bx |
TBD | ||||||
By |
TBD | |||||||
Color Gamut | 70 | 72 | % | |||||
Response Time | G to G | Tg | ms |
Handling Precautions:
1.Obey the supply voltage sequence. If wrong sequence is applied, the module would be damaged.
2.The electrochemical reaction caused by DC voltage will lead to LCD module degradation, so DC drive should be avoided.
3.Do not exceed the absolute maximum rating value. (supply voltage variation, input voltage variation, variation in part contents and environmental temperature, and so on) Otherwise the Module may be damaged.