29 Inch Bar Type Tft 1920x540 Ips Viewing Angle Lvds Interface 51 Pins
General Description:
The DV290FBM-N10 display resolution is 1920 (RGB) x 540, aspect ratio is >3:1 (W:H), and the pixels are arranged in vertical RGB stripes. Its display area size is 705.6×198.45 (W×H) mm, viewing size is 709.6×202.45 (W×H) mm, exterior size is 720.8×226.25 (W×H) mm, and surface finish is Haze 25%, Hard coating (3H).
Features:
1.LVDS interface with 2 pixel / clock
2.High-speed response
3.Low color shift image quality
4.8-bit color depth, display 16.7M colors
5.Wide viewing angle
6.DE (Data Enable) only mode
7.HADS technology is applied for high display quality
8.RoHS compliant
Specifications:
Parameter | Specification | Unit | Remarks |
Active area | 705.6(H)x198.45(V) | mm | |
Number of pixels | 1920(H) × 540(V) | pixels | |
Pixel pitch | 122.5(H) x367.5(V) | um | |
Pixel arrangement | Pixels RGB Vertical stripe | ||
Display colors | 16.7M | colors | 8bits True |
Display mode | Normally Black | ||
Dimensional outline | 720.8(H)*226.25(V)*8.4(Body) | mm | Total thickness 21mm |
Weight | 2415± 100 | g | |
Power Consumption | 40.66 | Watt | Typ. |
Bezel width (L/R/U/D) | 5.6/5.6/11.9/11.9 | mm | |
Surface Treatment | Haze 25% /3H | ||
Back-light | E-LED , 2ea LED bar-down side | ||
Possible display type | Landscape and Portrait Enabled |
Absolute Maximum Ratings:
Parameter | Symbol | Min. | Max. | Unit | Remark |
Power Supply Voltage | VDD | 8 | 13.2 | V | Ta = 25 ℃ |
Operating Temperature | TOP | 0 | +50 | ℃ | |
Storage Temperature |
TSUR |
-20 | +60 | ℃ |
|
TST |
-20 | +60 | ℃ | ||
Operating Ambient Humidity | Hop | 10 | 80 | %RH | |
Storage Humidity | Hst | 10 | 80 | %RH |
Electrical Specifications:
Parameter | Symbol | Values | Unit | |||
Min | Typ | Max | ||||
Power Supply Input Voltage | VDD | 10.8 | 12 | 13.2 | Vdc | |
Power Supply Ripple Voltage | VRP | 400 | mV | |||
Power Supply Current | IDD | - | 250 | 500 | mA | |
Power Consumption | PDD | - | 3 | 6.6 | Watt | |
Rush current | IRUSH | - | - | 3.0 | A | |
LVDS Interface |
Differential Input High Threshold Voltage |
VTH |
- |
+100 | mV | |
Differential Input Low Threshold Voltage |
VTL | -100 |
- |
mV | ||
Common Input Voltage | VLC | 0.7 | - | 1.6 | V | |
LVDS swing voltage | VID | ± 100 | ± 600 | mV | ||
CMOS Interface |
Input High Threshold Voltage |
VIH | 2.1 |
- |
3.6 | V |
Input Low Threshold Voltage |
VIL | 0 | 1.1 | V | ||
Input current | IIN | -10 | - | 10 | µA | |
Pull low resistor | RPD | 50 | 100 | 150 | KQ |
Interface Connection:
Pin No |
Symbol | Description |
Pin No |
Symbol | Description |
1 | VDD | Power Supply (12V) | 27 | ELV1N | Negative Transmission data of Pixel 1 (EVEN) |
2 | VDD | Power Supply (12V) | 28 | ELV1P | Positive Transmission data of Pixel 1 (EVEN) |
3 | VDD | Power Supply (12V) | 29 | ELV2N | Negative Transmission data of Pixel 2 (EVEN) |
4 | VDD | Power Supply (12V) | 30 | ELV2P | Positive Transmission data of Pixel 2 (EVEN) |
5 | VDD | Power Supply (12V) | 31 | GND | Ground |
6 | NC | Not connection, this pin should be open | 32 | ELVCKN | Negative Transmission Clock(EVEN) |
7 | GND | Ground | 33 | ELVCKP | Positive Transmission Clock(EVEN) |
8 | GND | Ground | 34 | GND | Ground |
9 | GND | Ground | 35 | ELV3N | Negative Transmission data of Pixel 3 (EVEN) |
10 | OLV0N | Negative Transmission data of Pixel 0 (ODD) | 36 | ELV3P | Positive Transmission data of Pixel 3 (EVEN) |
11 | OLV0P | Positive Transmission data of Pixel 0 (ODD) | 37 | NC | Not connection, this pin should be open |
12 | OLV1N | Negative Transmission data of Pixel 1 (ODD) | 38 | NC | Not connection, this pin should be open |
13 | OLV1P | Positive Transmission data of Pixel 1 (ODD) | 39 | GND | Ground |
14 | OLV2N | Negative Transmission data of Pixel 2 (ODD) | 40 | NC | Not connection, this pin should be open |
15 | OLV2P | Positive Transmission data of Pixel 2 (ODD) | 41 | NC | Not connection, this pin should be open |
16 | GND | Ground | 42 | NC | Not connection, this pin should be open |
17 | OLVCKN | Negative Transmission Clock(ODD) | 43 | NC | Not connection, this pin should be open |
18 | OLVCKP | Positive Transmission Clock(ODD) | 44 | NC | Not connection, this pin should be open |
19 | GND | Ground | 45 | LVDS_SE L | LVDS format select |
20 | OLV3N | Negative Transmission data of Pixel 3 (ODD) | 46 | NC | Not connection, this pin should be open |
21 | OLV3P | Positive Transmission data of Pixel 3 (ODD) | 47 | NC | Not connection, this pin should be open |
22 | NC | Not connection, this pin should be open | 48 | NC | Not connection, this pin should be open |
23 | NC | Not connection, this pin should be open | 49 | SCL_PG | I2C_SCL used for BOE |
24 | GND | Ground | 50 | SDA_PG | I2C_SDA used for BOE |
25 | ELV0N | Negative Transmission data of Pixel 0 (EVEN) | 51 | NC | Not connection, this pin should be open |
26 | ELV0P | Positive Transmission data of Pixel 0 (EVEN) |
Optical Specification:
Parameter | Symbol | Condition | Min | Typ | Max | Unit | ||
Viewing Angle |
Horizontal |
Θ3 |
CR > 10 |
80 | 89 | - | Deg. | |
Θ9 | 80 | 89 | - | Deg. | ||||
Vertical |
Θ12 | 80 | 89 | - | Deg. | |||
Θ6 | 80 | 89 | - | Deg. | ||||
Brightness | Lv |
Θ=0° (Center) Normal Viewing Angle |
560 | 700 | - | nit | ||
Contrast ratio | CR | 800:1 | 1200:1 | - | ||||
White Luminance uniformity | ΔY | 75 |
- |
- |
% | |||
Reproduction of color |
White |
Wx |
TYP. - 0.03 |
0.271 |
TYP. + 0.03 |
|||
Wy |
0.292 | |||||||
Red |
Rx |
0.650 | ||||||
Ry |
0.332 | |||||||
Green |
Gx |
0.287 | ||||||
Gy |
0.616 | |||||||
Blue |
Bx |
0.145 | ||||||
By |
0.082 | |||||||
Color Gamut | 69 | 72 | - | % | ||||
Response Time | G to G | Tg | - | 15 | - | ms |
Handling Precautions:
1.Obey the supply voltage sequence. If wrong sequence is applied, the module would be damaged.
2.The electrochemical reaction caused by DC voltage will lead to LCD module degradation, so DC drive should be avoided.
3.The cables should be as short as possible between System Board and PCB interface.