10.1 Inch Tft Screen 1280x800 With Edp Interface 30 Pins 250 Nits
General Description:
1.1Lane eDP1.2 Interface
2.Thin and light weight
3.Display 16.7M colors (Hi FRC)
4.3.3V for Logic Power
5.RoHS Compliant
Specifications:
Parameter | Specification | Unit | Remarks |
Active area | 216.96(H) × 135.60(V) | mm | |
Number of pixels | 1280(H) × 800(V) | pixels | |
Pixel pitch | 56.5(H) × 169.5(V) | ㎛ | |
Pixel arrangement | Pixels RGB stripe arrangement | ||
Display colors | 16.7M(6bits + Hi-FRC) | colors | |
Display mode | Transmission mode. Normally Black | ||
Outline Dimension | 228.3× 149.05 × 2.4typ. | mm | |
Weight | 155(max) | gram | |
Surface Treatment | HC Glare | ||
Back-light | Bottom edge side, 1-LED Lighting Bar Type | 36* LED Array |
Absolute Maximum Ratings:
Parameter | Symbol | Min. | Max. | Unit |
Power Supply Voltage |
VDD |
-0.3 | 4.2 | V |
Logic Supply Voltage |
VIN |
Vss-0.3 | VDD+0.3 | V |
Operating Temperature | TOP | 0 | +50 | ℃ |
Storage Temperature |
TST |
-20 | +60 | ℃ |
Electrical Specifications:
Parameter | Min. | Typ. | Max. | Unit | Remarks | |
Power Supply Voltage |
VDD |
3.0 | 3.3 | 3.6 | V | |
Power Supply Current |
IDD |
- | 212 | 272 | mA | |
Positive-going Input Thresh old Voltage |
VIT+ |
- |
- |
100 |
mV |
Vcm = 1.2V typ. |
Negative-going Input Thresh old Voltage |
VIT- |
-100 |
- |
- |
mV |
|
Differential Input Voltage |
VID |
380 |
- |
1200 |
mV |
|
Power Consumption |
PD |
- |
0.7 | 0.9 | W | white pattern |
PBL |
- |
1.8 | 1.84 | W | W/I Driver | |
Ptotal |
- |
2.5 |
2.74 |
W |
Interface Connection:
Terminal | Symbol | Functions |
Pin No. | Symbol | Description |
1 | NC | NC |
2 | GND | Ground |
3 | EDP-RX1N | eDP RX channel 1 negative |
4 | EDP-RX1P | eDP RX channel 1 positive |
5 | GND | Ground |
6 | EDP-RX0N | eDP RX channel 0 negative |
7 | EDP-RX0P | eDP RX channel 0 positive |
8 | GND | Ground |
9 | AUX-P | eDP AUX CH positive |
10 | AUX-N | eDP AUX CH negative |
11 | GND | Ground |
12 | VDD | Power Supply, 3.3V |
13 | VDD | Power Supply, 3.3V |
14 | BIST | Aging Mode Power Supply |
15 | GND | Ground |
16 | GND | Ground |
17 | HPD | HPD |
18 | LED_GND | LED_GND |
19 | LED_GND | LED_GND |
20 | LED_GND | LED_GND |
21 | LED_GND | LED_GND |
22 | LED_EN | LED_EN |
23 | LED-PWMIN | LED PWMIN |
24 | NC | NC |
25 | NC | NC |
26 | VLED | LED Power Supply (4.5V - 12V) |
27 | VLED | LED Power Supply (4.5V - 12V) |
28 | VLED | LED Power Supply (4.5V – 12V) |
29 | VLED | LED Power Supply (4.5V - 12V) |
30 | NC | NC |
Optical Specification:
Parameter | Symbol | Condition | Min. | Typ. | Max. | Unit | |
Viewing Angle range |
Horizontal | Θ3 |
CR > 10 |
80 | 85 | - | Deg. |
Θ9 | 80 | 85 | - | Deg. | |||
Vertical | Θ12 | 80 | 85 | - | Deg. | ||
Θ6 | 80 | 85 | - | Deg. | |||
Color Gamut | - | 50 | - | % | |||
Luminance Contrast ratio | CR | Θ = 0° | 600 | 800 | - | ||
Luminance of White | 5 Points | Yw |
Θ = 0° |
- |
250 |
- |
cd/m2 |
White Luminance uniformity |
13 Points |
ΔY5 |
62.5 |
71.4 |
- |
||
White Chromaticity |
Wx |
Θ = 0° |
Typ. -0.03 | 0.313 | Typ.+0.03 | ||
Wy |
0.329 | ||||||
Reproduction of color |
Red |
Rx |
Θ = 0° |
Typ. -0.03 |
0.590 |
Typ. +0.03 |
|
Ry | 0.353 | ||||||
Green |
Gx |
0.326 | |||||
Gy | 0.570 | ||||||
Blue |
Bx |
0.157 | |||||
By |
0.116 | ||||||
Response Time (Rising + Falling) | TRT |
Ta= 25℃ Θ=0° |
- |
30 |
- |
ms | |
Gamma Scale | 2.0 | 2.2 | 2.4 | ||||
Cross Talk | CT | Θ = 0° | - | - | 2.0 | % |
Handling Precautions:
Response time will be extremely delay at lower temperature than the operating temperature range and on the other hand LCM may turn black at temperature above its operational range. However those phenomenon do not mean malfunction or out of order with the LCM. The LCM will revert to normal operation once the temperature returns to the recommended temperature range for normal operation.