MachineU > China Products > Consumer Electronic > Mobile Phone Parts > Mobile Phone LCDs
1280x800 Tablet LCD Screen 330 Nits 40 Pins Lvds IPS 10.1 TFT LCD Display
1280x800 Tablet LCD Screen 330 Nits 40 Pins Lvds IPS 10.1 TFT LCD Display
1280x800 Tablet LCD Screen 330 Nits 40 Pins Lvds IPS 10.1 TFT LCD Display
1280x800 Tablet LCD Screen 330 Nits 40 Pins Lvds IPS 10.1 TFT LCD Display
1280x800 Tablet LCD Screen 330 Nits 40 Pins Lvds IPS 10.1 TFT LCD Display
1280x800 Tablet LCD Screen 330 Nits 40 Pins Lvds IPS 10.1 TFT LCD Display
1280x800 Tablet LCD Screen 330 Nits 40 Pins Lvds IPS 10.1 TFT LCD Display
1280x800 Tablet LCD Screen 330 Nits 40 Pins Lvds IPS 10.1 TFT LCD Display
Specifications
Brand Name :
BOE
Model Number :
BP101WX1-206
Certification :
ROHS
Place of Origin :
China
MOQ :
10pcs
Price :
USD37
Payment Terms :
T/T
Supply Ability :
5000pcs
Delivery Time :
10work days
Packaging Details :
60pcs/box original packaging
Outline Size :
228.6(H)×149.2(V)×2.39(T)mm
Active area :
216.96(H)×135.60(V)mm
Pixels :
1280(H)×800(V)
Angle Of View :
80/80/80/80
Luminance :
330nit
Color Gamma :
50%
Description

10.1 Inch 1280x800 Ips Lcd Display 40 Pins Lvds BP101WX1-206 330 Nits

General Description:

The manufacturer of BP101WX1-206 is BOE, the product model is BP101WX1-206, the screen size is 10.1", the resolution is 1280×800, the resolution is WXGA for short, the display ratio is 16:10, and the pixel arrangement is RGB vertical strips.

Features:

  • 1 Channel LVDS Interface with 1 pixel / clock
  • Thin and light weight
  • Display 16.7M colors (Hi FRC)
  • High luminance and contrast ratio, low reflection and wide viewing angle
  • DE (Data Enable) signal mode
  • 3.3V for Logic Power and 3.7V for LED Back Light Power
  • RoHS Compliant

Specifications:

Parameter Specification Unit Remarks
Active area 216.96(H) × 135.60(V) mm
Number of pixels 1280(H) × 800(V) pixels
Pixel pitch 169.5 ㎛
Pixel arrangement Pixels RGB stripe arrangement
Display colors 16.7M(6bits + Hi-FRC) colors
Display mode Transmission mode. Normally Black
Outline Dimension 228.6 × 149.2 × 2.39typ. mm
Weight 150 (max) gram
Surface Treatment Hard Coating, 3H, Low Reflection (Front Polarizer)
Back-light Bottom edge side, 1-LED Lighting Bar Type 36* LED Array

Parameter Symbol Min. Max. Unit Remarks
Power Supply Voltage (LCD Module)

VDD

 -0.3 4.2 V
Back-light Power Supply Voltage HVDDOUT -0.3 18 V
Back-light LED Current

IHVDD

 - 96 mA
Back-light LED Reverse Voltage

VR

 - 2 V
Operating Temperature TOP 0 +50 C

Storage Temperature

TST

 -20 +60 C


Electrical Specifications:

Parameter

Symbol

 Values

Unit

Notes
Min Typ. Max
Power Supply Input Voltage VDD 3.0 3.3 3.6 V Note 1
Power Supply Current IDD - 303 - mA
LED Driver Power Supply Voltage HVDD 3

-

 18 V


Note 2
LED Driver Power Supply Current IHVDD

-

 568

-

 mA
LED Driver Efficiency η - 85 - %
Positive-going Input Threshold Voltage

VIT+

-

-

 +100 mV

Vcom = 1.2V

typ.
Negative-going Input Threshold Voltage

VIT-

 -100

-

-

 mV
Differential input common mode voltage

Vcom

-

 1.2

-

 V VIH=100mV, VIL=-100mV

Power Consumption

PD

 - 1.0 W

PBL

 - 2.4 W Have Driver

PTotal

 - 3.4 W











Notes: 1.The supply voltage is measured and specified at the interface connector of LCM.The current draw and power consumption specified is for 3.7V at 25C Max value at White Pattern. 2.Calculated value for reference(VLED X ILED) 3.CTF of Power Supply Current:PD/PBL.

Optical Specification:

Parameter Symbol Condition Min. Typ. Max. Unit Remark
Viewing Angle range Horizontal Θ3 CR > 10 70 80 - Deg. Note 1
Θ9 70 80 - Deg.
Vertical Θ12 70 80 - Deg.
Θ6 70 80 - Deg.
Color Gamut - 50 - %
Luminance Contrast ratio CR Θ = 0. 600 - - Note 2
Luminance of White 5 Points Y

Θ = 0.

 280 330 - cd/m2 Note 3

White

Luminance

uniformity

 5 Points ΔY5 - 80 - Note 4
White Chromaticity Wx Θ = 0. Typ. -0.03 0.313 Typ. +0.03 Note 5
Wy 0.329
Reproduction of color Red Rx Θ = 0.

Typ. -0.03

 0.600

Typ. +0.03
R 0.340
Green Gx 0.315
G 0.565
Blue Bx 0.150
By
0.125
Response Time (Rising + Falling) TRT

Ta= 25.C

Θ = 0.

 - 25 - ms
Cross Talk CT Θ = 0. - - 2.0 %

Notes :

1. Viewing angle is the angle at which the contrast ratio is greater than 10. The viewing angles are determined for the horizontal or 3, 9 o’clock direction and the vertical or 6, 12 o’clock direction with respect to the optical axis which is normal to the LCD surface.

2. Contrast measurements shall be made at viewing angle of Θ= 0 and at the center of the LCD surface. Luminance shall be measured with all pixels in the view field set first to white, then to the dark (black) state . Luminance Contrast Ratio (CR) is defined mathematically.

3. Center Luminance of white is defined as luminance values of 5point average across the LCD surface. Luminance shall be measured with all pixels in the view field set first to white. This measurement shall be taken at the locations for a total of the measurements per display, the LED current is set at 20mA.

4. The White luminance uniformity on LCD surface is then expressed as : ΔY = Minimum Luminance of 5 (13)points / Maximum Luminance of 5(13).

5. The color chromaticity coordinates specified in Table 5 shall be calculated from the spectral data measured with all pixels first in red, green, blue and white. Measurements shall be made at the center of the panel.

Interface Connection:

The electronics interface connector is 20455-040E-12.

Terminal Symbol Functions
Pin No. Symbol Description
1 NC Non Connection
2 VDDIN Power supply VDDIN=3.3V (Typ.)
3 VDDIN
4 VDC Power supply VDC=3.3V (Typ.)
5 NC Non Connection
6 CLK EDID CLK for EDID function use
7 Data EDID CLK for EDID function use
8 RIN0- LVDS Negative data signal (-)
9 RIN0+ LVDS Positive data signal (+)
10 GND GROUND
11 RIN1- LVDS Negative data signal (-)
12 RIN1+ LVDS Positive data signal (+)
13 GND GROUND
14 RIN2- LVDS Negative data signal (-)
15 RIN2+ LVDS Positive data signal (+)
16 GND GROUND
17 LVDS_CLK- LVDS Negative CLK signal (-)
18 LVDS_CLK+ LVDS Positive CLK signal (+)
19 GND GROUND
20 RIN3-

LVDS Negative data signal (-)
21 RIN3+ LVDS Positive data signal (+)
22 CE_EN Color engine enable
23 NC Non Connection
24 NC Non Connection
25 GND GROUND
26 NC Non Connection
27 NC Non Connection
28 GND GROUND
29 NC Non Connection
30 NC Non Connection
31 LED_GND

LED GROUND
32 LED_GND
33 LED_GND
34 NC Non Connection
35 LED_PWM LED driver PWM duty
36 LED_EN LED driver enable
37 CABC_EN CABC function enable
38 VLED

Power supply VLED=3~18V (Typ.)
39 VLED
40 VLED

Dimensional Requirements:

Parameter Specification Unit
Active Area 216.96 (H) × 135.6 (V)
Number of pixels 1280(H) X800 (V) (1 pixel = R + G + B dots)
Pixel pitch 0.1695
Pixel arrangement RGB Vertical stripe
Display colors 16.7M
Display mode Normally Black
Dimensional outline 228.6*149.26*2.39 (Typ.) mm
Weight: 150 (Max) gram
Back-light LED, Horizontal-LED Array type

Matters Needing Attention:

Cautions when taking out the module:Pick the pouch only, when taking out module from a shipping package.

Cautions for the operation:When the module is operating, do not lose CLK, ENAB signals. If any one of these signals is lost, the LCD panel would be damaged.

Other cautions:Do not disassemble and/or re-assemble LCD module.Do not re-adjust variable resistor or switch etc.When returning the module for repair or etc., Please pack the module not to be broken. We recommend to use the original shipping packages.

Reliability Test:

No Conditions
1 High temperature storage test Ta = 60 C, 240 hrs
2 Low temperature storage test Ta = -20 C, 240 hrs
3 High temperature & high humidity operation test Ta = 50 C, 90%RH, 240 hrs
4 High temperature operation test Ta = 50 C, 240 hrs
5 Low temperature operation test Ta = 0 C, 240 hrs
6 Thermal shock Ta = -20 C ↔ 60 C (0.5 hr), 100 cycle
7 Power on/off 2s on/2s off 20000cycles
8

Vibration test

(non-operating)

1.5G, 10~500Hz Sign

X,Y,Z / Sweep rate : 0.5hour
9

Shock test

(non-operating)

 220G, Half Sine Wave 2msec ± X,±Y,± Z Once for each direction
10

Electro-static discharge test

(non-operating)

Air : 150 pF, 330Ω, 15 KV

Contact : 150 pF, 330Ω, 8 KV

Product tags

5.5 lcd display

,

lcd 192 x 64

,

5.5 display
Send your message to this supplier
Send Now

1280x800 Tablet LCD Screen 330 Nits 40 Pins Lvds IPS 10.1 TFT LCD Display

Ask Latest Price
Watch Video
Product Detail
Brand Name :
BOE
Model Number :
BP101WX1-206
Certification :
ROHS
Place of Origin :
China
MOQ :
10pcs
Price :
USD37
Contact Supplier
video
1280x800 Tablet LCD Screen 330 Nits 40 Pins Lvds IPS 10.1 TFT LCD Display
1280x800 Tablet LCD Screen 330 Nits 40 Pins Lvds IPS 10.1 TFT LCD Display
1280x800 Tablet LCD Screen 330 Nits 40 Pins Lvds IPS 10.1 TFT LCD Display
1280x800 Tablet LCD Screen 330 Nits 40 Pins Lvds IPS 10.1 TFT LCD Display

Shenzhen FRIDA LCD Co., Ltd

Active Member
3 Years
guangdong, shenzhen
Since 2011
Business Type :
Manufacturer
Main Products :
TFT Color LCD Display, IPS TFT LCD Display, HDMI TFT LCD Display
Total Annual :
30000000-35000000
Employee Number :
245~295
Certification Level :
Active Member
Discover similar products
View More

Find Similar Products By Category:

Supplier Homepage Products 10.1 Inch LCD Panel
MachineU China Products Consumer Electronic Mobile Phone Parts Mobile Phone LCDs
Contact Supplier
Submit Requirement