15.6 Inch Tft Lcd Display 1366x768 With Edp Interface 30 Pins NT156WHM-N12
General Description:
NT156WHM-N12 each pixel is divided into RED, GREEN, BLUE dots which are arranged in vertical Stripe and this module can display 262,144 colors. The TFT-LCD panel used for this module is a low reflection and higher color type. Therefore, this module is suitable for Notebook PC. The LED Driver for back-light driving is built in this model.All input signals are eDP1.2 interface compatible .
Specifications:
Parameter | Specification | Unit |
Active area | 344.23(H) × 193.54(V) | mm |
Number of pixels | 1366 (H) × 768 (V) | pixels |
Pixel pitch | 0.252 (H) X 0.252 (V) | mm |
Pixel arrangement | RGB Vertical stripe | |
Display colors | 262K | colors |
Display mode | Normally White | |
Dimensional outline | 359.5(H)*223.8(V) (W/PCB)*3.8(Max) | mm |
Weight | 400 (max) | g |
Surface treatment | Glare | |
Back-light | Lower Down side, 1-LED Lighting Bar type | |
| PD : 1.2 (max) | W |
PBL :2.6(max) | W | |
Ptotal :3.8(max) | W |
Absolute Maximum Ratings:
Parameter | Symbol | Min. | Max. | Unit |
Power Supply Voltage | VDD | -0.3 | 4.0 | V |
Logic Supply Voltage | VIN | Vss-0.3 | VDD+0.3 | V |
Operating Temperature | TOP | 0 | +50 | ℃ |
Storage Temperature | TST | -20 | +60 | ℃ |
Electrical Specifications:
Parameter | Min. | Typ. | Max. | Unit | |
Power Supply Voltage | VDD | 3.0 | 3.3 | 3.6 | V |
Permissible Input Ripple Voltage | VRF | - | - | 100 | mV |
Power Supply Current | IDD | - | TBD | - | mA |
Differential Input Voltage | VID | 200 | - | 600 | mV |
| PD | - | 1.02 | 1.2 | W |
PBL | - | - | 2.6 | W | |
Ptotal | - | - | 3.8 | W |
Interface Connection:
Terminal | Symbol | Functions |
Pin No. | Symbol | Description |
1 | CABC_ENABLE | Reserved DCR function, not open for now |
2 | H_GND | Ground |
3 | NC | No Connection |
4 | NC | No Connection |
5 | H_GND | Ground |
6 | LANE0_N | eDP RX channel 0 negative |
7 | LANE0_P | eDP RX channel 0 positive |
8 | H_GND | Ground |
9 | AUX_CH_P | eDP AUX CH positive |
10 | AUX_CH_N | eDP AUX CH negative |
11 | H_GND | Ground |
12 | LCD_VCC | Power Supply, 3.3V (typ.) |
13 | LCD_VCC | Power Supply, 3.3V (typ.) |
14 | LCD_Self_Test | Panel self test enable |
15 | H_GND | Ground |
16 | H_GND | Ground |
17 | HPD | Hot plug detect output |
18 | BL_GND | LED Ground |
19 | BL_GND | LED Ground |
20 | BL_GND | LED Ground |
21 | BL_GND | LED Ground |
22 | BL_ENABLE | LED enable pin(+3.3V Input) |
23 | BL_PWM | System PWM Signal Input |
24 | NC | No Connection |
25 | COLOR_ENABLE | test enable |
26 | BL_POWER | LED Power Supply 5V-21V |
27 | BL_POWER | LED Power Supply 5V-21V |
28 | BL_POWER | LED Power Supply 5V-21V |
29 | BL_POWER | LED Power Supply 5V-21V |
30 | NC | No Connection |
Handling Precautions:
1.As the electrostatic discharges may break the LCD module, handle the LCD module with care. Peel a protection sheet off from the LCD panel surface as slowly as possible.
2.Pick the pouch only, when taking out module from a shipping package.