15.6 Inch Tft Display 1920x1080 With Lvds Interface 40 Pins MG1561B01-6
General Description:
1.FHD Resolution (1920 * 1080)
2.Very High Contrast Ratio: 3000:1
3.Ultra Wide Viewing Angle: 178°(H)/178°(V) (CR>10)
4.DE (Data Enable)Mode
5.LVDS (Low Voltage Differential Signaling) Interface
Specifications:
Item | Specification | Unit | Note |
Active Area | 344.16 (H) * 193.59 (V) | mm | |
Module Size | 351.86 (H) *206.33 (V) * 6.30(D) | mm | With PCB |
Module Size | 351.86 (H) *206.33 (V) * 3.20(D) | mm | Without PCB |
Driving Scheme | a-Si TFT Active Matrix | - | |
Number of Pixels | 1920 * 1080 | pixel | |
Pixel Pitch (Sub Pixel) | 59.75*179.25 | um | |
Pixel Arrangement | RGB Vertical Stripe | - | |
Display Colors | 16.7 M | color | 8bit |
Display Mode | Transmissive Mode, Normally Black | - | VA Mode |
Luminance | 250( typ) | cd/m2 | |
Color Chromaticity | NTSC 72% (typ) | ||
Contrast Ratio | 3000:1(Typ.) | ||
Weight | 0.53 | Kg | |
View Angle (CR>10) | +89/-89 (H), +89/-89 (V) (Typ.) | ||
Surface Treatment | Anti-glare, Haze 25%, Hard Coating (3H) | ||
BLU Type | E-LED | - |
Electrical Specifications:
Parameter | Symbol | Value | Unit | |||
Min. | Typ. | Max. | ||||
Power Supply Voltage | VCC | 10.8 | 12 | 13.2 | V | |
Rush Current | IRUSH | - | - | 3 | A | |
Power Supply Current
|
White Pattern | - | 0.47 | 0.57 | A | |
Mosaic Stripe | - | 0.65 | 0.78 | A | ||
Black Pattern | - | 0.46 | 0.55 | A | ||
Horizontal Stripe | - | 0.74 | 0.89 | A | ||
Power Consumption (Mosaic Pattern) |
Poc | -- | 3.7 | 4.45 | Watt |
Interface Connection:
Pin No. | Symbol | Description |
1 | RxO0- | Negative LVDS differential data input (Odd data) |
2 | RxO0+ | Positive LVDS differential data input (Odd data) |
3 | RxO1- | Negative LVDS differential data input (Odd data) |
4 | RxO1+ | Positive LVDS differential data input (Odd data) |
5 | RxO2- | Negative LVDS differential data input (Odd data) |
6 | RxO2+ | Positive LVDS differential data input (Odd data) |
7 | GND | Ground |
8 | RxOCLK- | Negative LVDS differential clock input (Odd clock) |
9 | RxOCLK+ | Positive LVDS differential clock input (Odd clock) |
10 | GND | Ground |
11 | RxO3- | Negative LVDS differential data input (Odd data) |
12 | RxO3+ | Positive LVDS differential data input (Odd data) |
13 | GND | Ground |
14 | RxE0- | Negative LVDS differential data input (Even data) |
15 | RxE0+ | Positive LVDS differential data input (Even data) |
16 | RxE1- | Negative LVDS differential data input (Even data) |
17 | RxE1+ | Positive LVDS differential data input (Even data) |
18 | RxE2- | Negative LVDS differential data input (Even data) |
19 | RxE2+ | Positive LVDS differential data input (Even data) |
20 | GND | Ground |
21 | RxECLK- | Negative LVDS differential clock input (Even clock) |
22 | RxECLK+ | Positive LVDS differential clock input (Even clock) |
23 | GND | Ground |
24 | RxE3- | Negative LVDS differential data input (Even data) |
25 | RxE3+ | Positive LVDS differential data input (Even data) |
26 | GND | Ground |
27 | LCD_VCC | LCD VCC(12V) |
28 | LCD_VCC | LCD VCC(12V) |
29 | BIST | LCD self-test (Normal mode: NC or pull L ;BIST mode: pull H) |
30 | BL_ENABLE | Backlight on/off |
31 | BL_PWM_DIM | System PWM |
32 | BL_POWER | LED Power Supply Input Voltage(12V) |
33 | BL_POWER | LED Power Supply Input Voltage(12V) |
34 | BL_POWER | LED Power Supply Input Voltage(12V) |
35 | BL_POWER | LED Power Supply Input Voltage(12V) |
36 | GND | Ground |
37 | GND | Ground |
38 | GND | Ground |
39 | ID1 | Reserved PIN, Default ‘H’ , Recommend NC |
40 | ID2 | Reserved PIN, Default ‘L’, Recommend NC |
Optical Specification:
Item | Symbol | Condition | Min. | Typ. | Max. | Unit | |
Static Contrast Ratio | CR |
H =0 , V = 0 Normal direction at center point with CSOT’s BLU ILED = 25mA |
2000 | 3000 | - | - | |
Response Time | Ton+Toff | 30 | 35 | ms | |||
Crosstalk | CT- 127 | - | - | 1.2 | - | ||
Luminance of White (5points) | L | 212 | 250 | - | cd/m | ||
Luminous Uniformity |
5points | ΔL5 | 80 | 85 | - | % | |
13points | ΔL13 | 62.5 | 70 | - | % | ||
Color Chromaticity (CIE1931) |
White | WX |
Typ.- 0.03 |
0.313 |
Typ. + 0.03 |
- | |
WY | 0.329 | - | |||||
Red |
RX | 0.650 | - | ||||
RY | 0.338 | - | |||||
Green |
GX | 0.312 | - | ||||
GY | 0.615 | - | |||||
Blue |
BX | 0.150 | - | ||||
BY | 0.071 | - | |||||
Color Gamut | CG | 68 | 72 | - | % NTSC | ||
Viewing Angle |
Horizontal |
H+
|
CR> 10 |
80 | 89 | - |
Deg. |
H-
|
80 | 89 | - | ||||
Vertical |
V+
|
80 | 89 | - | |||
V-
|
80 | 89 | - |
Handling Precautions:
1.When the surface is dusty, please wipe gently with absorbent cotton or other soft material.
2.Use fingerstalls of soft gloves in order to keep clean display quality, when persons handle the LCD module for incoming inspection or assembly.