15.6 Inch Tft Screen 1920x1080 With Lvds Interface 40 Pins MG1561B01-6
General Description:
Typical features of MG1561B01-6 are: white LED backlight, LED driver included, terminal flip-flop, and matte surface. It has an operating temperature of 0 ~ 50°C and a storage temperature of -20 ~ 60°C.
Specifications:
Item | Specification | Unit | Note |
Active Area | 344.16 (H) * 193.59 (V) | mm | |
Module Size | 351.86 (H) *206.33 (V) * 6.30(D) | mm | With PCB |
Module Size | 351.86 (H) *206.33 (V) * 3.20(D) | mm | Without PCB |
Driving Scheme | a-Si TFT Active Matrix | - | |
Number of Pixels | 1920 * 1080 | pixel | |
Pixel Pitch (Sub Pixel) | 59.75*179.25 | um | |
Pixel Arrangement | RGB Vertical Stripe | - | |
Display Colors | 16.7 M | color | 8bit |
Display Mode | Transmissive Mode, Normally Black | - | VA Mode |
Luminance | 250( typ) | cd/m2 | |
Color Chromaticity | NTSC 72% (typ) | ||
Contrast Ratio | 3000:1(Typ.) | ||
Weight | 0.53 | Kg | |
View Angle (CR>10) | +89/-89 (H), +89/-89 (V) (Typ.) | ||
Surface Treatment | Anti-glare, Haze 25%, Hard Coating (3H) | ||
BLU Type | E-LED | - |
Electrical Specifications:
Parameter | Symbol | Value | Unit | |||
Min. | Typ. | Max. | ||||
Power Supply Voltage | VCC | 10.8 | 12 | 13.2 | V | |
Rush Current | IRUSH | - | - | 3 | A | |
Power Supply Current
|
White Pattern | - | 0.47 | 0.57 | A | |
Mosaic Stripe | - | 0.65 | 0.78 | A | ||
Black Pattern | - | 0.46 | 0.55 | A | ||
Horizontal Stripe | - | 0.74 | 0.89 | A | ||
Power Consumption (Mosaic Pattern) |
Poc | -- | 3.7 | 4.45 | Watt |
Interface Connection:
Pin No. | Symbol | Description |
1 | RxO0- | Negative LVDS differential data input (Odd data) |
2 | RxO0+ | Positive LVDS differential data input (Odd data) |
3 | RxO1- | Negative LVDS differential data input (Odd data) |
4 | RxO1+ | Positive LVDS differential data input (Odd data) |
5 | RxO2- | Negative LVDS differential data input (Odd data) |
6 | RxO2+ | Positive LVDS differential data input (Odd data) |
7 | GND | Ground |
8 | RxOCLK- | Negative LVDS differential clock input (Odd clock) |
9 | RxOCLK+ | Positive LVDS differential clock input (Odd clock) |
10 | GND | Ground |
11 | RxO3- | Negative LVDS differential data input (Odd data) |
12 | RxO3+ | Positive LVDS differential data input (Odd data) |
13 | GND | Ground |
14 | RxE0- | Negative LVDS differential data input (Even data) |
15 | RxE0+ | Positive LVDS differential data input (Even data) |
16 | RxE1- | Negative LVDS differential data input (Even data) |
17 | RxE1+ | Positive LVDS differential data input (Even data) |
18 | RxE2- | Negative LVDS differential data input (Even data) |
19 | RxE2+ | Positive LVDS differential data input (Even data) |
20 | GND | Ground |
21 | RxECLK- | Negative LVDS differential clock input (Even clock) |
22 | RxECLK+ | Positive LVDS differential clock input (Even clock) |
23 | GND | Ground |
24 | RxE3- | Negative LVDS differential data input (Even data) |
25 | RxE3+ | Positive LVDS differential data input (Even data) |
26 | GND | Ground |
27 | LCD_VCC | LCD VCC(12V) |
28 | LCD_VCC | LCD VCC(12V) |
29 | BIST | LCD self-test (Normal mode: NC or pull L ;BIST mode: pull H) |
30 | BL_ENABLE | Backlight on/off |
31 | BL_PWM_DIM | System PWM |
32 | BL_POWER | LED Power Supply Input Voltage(12V) |
33 | BL_POWER | LED Power Supply Input Voltage(12V) |
34 | BL_POWER | LED Power Supply Input Voltage(12V) |
35 | BL_POWER | LED Power Supply Input Voltage(12V) |
36 | GND | Ground |
37 | GND | Ground |
38 | GND | Ground |
39 | ID1 | Reserved PIN, Default ‘H’ , Recommend NC |
40 | ID2 | Reserved PIN, Default ‘L’, Recommend NC |
Optical Specification:
Item | Symbol | Condition | Min. | Typ. | Max. | Unit | |
Static Contrast Ratio | CR |
H =0 , V = 0 Normal direction at center point with CSOT’s BLU ILED = 25mA |
2000 | 3000 | - | - | |
Response Time | Ton+Toff | 30 | 35 | ms | |||
Crosstalk | CT- 127 | - | - | 1.2 | - | ||
Luminance of White (5points) | L | 212 | 250 | - | cd/m | ||
Luminous Uniformity |
5points | ΔL5 | 80 | 85 | - | % | |
13points | ΔL13 | 62.5 | 70 | - | % | ||
Color Chromaticity (CIE1931) |
White | WX |
Typ.- 0.03 |
0.313 |
Typ. + 0.03 |
- | |
WY | 0.329 | - | |||||
Red |
RX | 0.650 | - | ||||
RY | 0.338 | - | |||||
Green |
GX | 0.312 | - | ||||
GY | 0.615 | - | |||||
Blue |
BX | 0.150 | - | ||||
BY | 0.071 | - | |||||
Color Gamut | CG | 68 | 72 | - | % NTSC | ||
Viewing Angle |
Horizontal |
H+
|
CR> 10 |
80 | 89 | - |
Deg. |
H-
|
80 | 89 | - | ||||
Vertical |
V+
|
80 | 89 | - | |||
V-
|
80 | 89 | - |
Handling Precautions:
1.Please do not leave LCD module in the environment of high humidity and high temperature for a long time.
2.Do not touch the parts inside LCD modules and the fluorescent lamp’s connector or cables in order to prevent electric shock.