21.5 Inch Tft 1920x1080 Full Viewing Angle Lvds Interface 30 Pins HR215WU1-120
General Description:
HR215WU1-120 resolution is 1920(RGB)×1080, pixel arrangement RGB vertical bar, pixel pitch 0.24825(H) × 0.24825(V)mm, exterior size 495.6×292.2 mm(H×V), display area 476.64×268.11 mm, aspect ratio 16:9. Anti-glare, 3H.
Features:
1.LVDS Interface with 2 pixel / clock
2.High-speed response
3.6-bit (Hi-FRC) color depth, display 16. 7M colors
4.Incorporated edge type back-light (One Light Bar)
5.High luminance and contrast ratio, low reflection and wide viewing angle
6.DE (Data Enable) only
7.RoHS /TCO 6.0 ,ES6.0 Compliant
Specifications:
Parameter | Specification | Unit |
Active area | 476.64(H) × 268. 11 (V) | mm |
Number of pixels | 1920(H) ×1080(V) | pixels |
Pixel pitch | 0.24825(H) ×0.24825(V) | mm |
Pixel arrangement | RGB Vertical stripe | - |
Display colors | 16.7M | colors |
Display mode | Normally Black | - |
Dimensional outline | 495.6(H) × 292.2(V) × 10.7(D) typ. | mm |
Weight | 1900 (typ.) | g |
Surface Treatment | Anti-glare, 3H | - |
Back-light | Lower side 1-LED Light bar Type | - |
Absolute Maximum Ratings:
Parameter |
Symbol | Min. | Max. | Unit | Remarks |
Power Supply Voltage |
VDD |
-0.5 | 5.5 | V |
Ta = 25℃ |
Logic Supply Voltage |
VIN |
VSS-0.3 | VDD+0.3 | V | |
Operating Temperature |
TOP |
0 | +50 | C | |
Storage Temperature |
TST |
-20 | +60 | C |
Electrical Specifications:
Parameter | Min. | Typ. | Max. | Unit | Remarks | ||
Power Supply Voltage |
VDD |
4.5 | 5.0 | 5.5 | V |
|
|
Power Supply Current |
IDD |
- | 800 | 1400 | mA | ||
In-Rush Current | IRUSH | - | - | 3 | A | ||
Permissible Input Ripple Voltage |
VRF |
- | - | 200 | mV | VDD = 5.0V | |
High Level Differential Input Threshold Voltage |
VIH |
- |
- |
+100 | mV | ||
Low Level Differential InputThreshold Voltage |
VIL |
- 100 |
- |
- |
mV | ||
Differential input voltage | VID | 200 | - | 600 | mV | ||
Differential input common mode voltage | Vcm | 1.0 | 1.2 | 1.5 |
VIH=100mV, V =- 100mV |
||
LED Voltage |
VL |
3.05 | 3.2 | 3.4 | V | ||
LED Channel Voltage |
VL |
45.75 | 48 | 51 | V | ||
LED Channel Current |
IL |
- | 60 | - | mA | ||
LED Lifetime | 30,000 | - | - | Hrs | I =60 mA | ||
Power Consumption |
PD |
- | 4.9 | 6.25 | W | ||
PBL |
- | 11.52 | 12.24 | W | IL=60 mA | ||
Ptotal |
- | 16.42 | 18.49 | W |
Optical Specifications:
VDD = 5.0V, Frame rate = 60Hz, Clock = 78MHz, IBL = 120mA, Ta =25±2℃
Parameter | Symbol | Condition | Min. | Typ. | Max. | Unit | ||
Viewing Angle range |
Horizontal |
Θ3 |
CR > 10 |
- | 89 | - | Deg. | |
Θ9 |
- | 89 | - | Deg. | ||||
Vertical |
Θ12 |
- | 89 | - | Deg. | |||
Θ6 |
- | 89 | - | Deg. | ||||
Viewing Angle range |
Horizontal |
Θ3 |
CR > 5 |
- | 89 | - | Deg. | |
Θ9 |
- | 89 | - | Deg. | ||||
Vertical |
Θ12 |
- | 89 | - | Deg. | |||
Θ6 |
- | 89 | - | Deg. | ||||
Luminance Contrast ratio | CR |
Θ = 0° (Center) Normal Viewing Angle |
700 | 1000 | - | |||
Luminance of White |
Yw |
200 | 250 | - | cd/m2 | |||
White luminance uniformity | ΔY | 75 | 80 | - | % | |||
Reproduction of color |
White |
Wx |
0.283 | 0.313 | 0.343 | |||
Wy |
0.299 | 0.329 | 0.359 | |||||
Red |
Rx |
0.617 | 0.647 | 0.677 | ||||
Ry |
0.309 | 0.339 | 0.369 | |||||
Green |
Gx |
0.277 | 0.307 | 0.337 | ||||
Gy |
0.603 | 0.633 | 0.663 | |||||
Blue |
Bx |
0.116 | 0.146 | 0.176 | ||||
By |
0.026 | 0.056 | 0.086 | |||||
Response Time |
Rising+Fal ling | Tr +Tf | 14 | 21 | ms | |||
Cross Talk | CT | - | - | 2.0 | % |
Interface Connection:
Module Side Connector : UJU IS100-L300-C23 or Equivalent
User Side Connector : JAE FI-X30H or Equivalent
Pin No | Symbol | Function |
1 | RXO0- | Negative Transmission data of Pixel 0 (ODD) |
2 | RXO0+ | Positive Transmission data of Pixel 0 (ODD) |
3 | RXO1- | Negative Transmission data of Pixel 1 (ODD) |
4 | RXO1+ | Positive Transmission data of Pixel 1 (ODD) |
5 | RXO2- | Negative Transmission data of Pixel 2 (ODD) |
6 | RXO2+ | Positive Transmission data of Pixel 2 (ODD) |
7 | BIST | L(GND):Black, H(3.3V):Rotational Pattern |
8 | RXOC- | Negative Transmission Clock (ODD) |
9 | RXOC+ | Positive Transmission Clock (ODD) |
10 | RXO3- | Negative Transmission data of Pixel 3 (ODD) |
11 | RXO3+ | PositiveTransmission data of Pixel 3 (ODD) |
12 | RXE0- | Negative Transmission data of Pixel 0 (EVEN) |
13 | RXE0+ | Positive Transmission data of Pixel 0 (EVEN) |
14 | GND | Power Ground |
15 | RXE1- | Negative Transmission data of Pixel 1 (EVEN) |
16 | RXE1+ | Positive Transmission data of Pixel 1 (EVEN) |
17 | GND | Power Ground |
18 | RXE2- | Negative Transmission data of Pixel 2 (EVEN) |
19 | RXE2+ | Positive Transmission data of Pixel 2 (EVEN) |
20 | RXEC- | Negative Transmission Clock (EVEN) |
21 | RXEC+ | Positive Transmission Clock (EVEN) |
22 | RXE3- | Negative Transmission data of Pixel 3 (EVEN) |
23 | RXE3+ | Positive Transmission data of Pixel 3 (EVEN) |
24 | GND | Power Ground |
25 | NC | Not connection, this pin should be open |
26 | NC | Not connection, this pin should be open |
27 | NC | Not connection |
28 | VDD1 | Power Supply:+5V |
29 | VDD2 | |
30 | VDD3 |
Handling Precautions:
Laminate film is attached to the module surface to prevent it from being scratched. Peel the laminate film off slowly just before the use with strict attention to electrostatic charges. Ionized air shall be blown over during the action. Blow off the 'dust' on the polarizer by using an ionized nitrogen gun, etc. Working under the following environments is desirable.All workers wear conductive shoes, conductive clothes, conductive fingerstalls and grounding belts without ail.Use Ionized blower for electrostatic removal, and peel of the laminate film with a constant speed. (Peeling of it at over 2 seconds)