21.5 Inch Lcd 1920x1080 Full Viewing Angle Lvds Interface 30 Pins HR215WU1-120
General Description:
HR215WU1- 120 is a color active matrix TFT LCD module using amorphous silicon TFT's (Thin Film Transistors) as an active switching devices. This module has a 21.5 inch diagonally measured active area with FHD resolutions (1920 horizontal by 1080 vertical pixel array). Each pixel is divided into RED, GREEN, BLUE dots which are arranged in vertical stripe and this module can display 16.7M colors. The TFT-LCD panel used for this module is adapted for a low reflection and higher color type.
Features:
1.LVDS Interface with 2 pixel / clock
2.High-speed response
3.6-bit (Hi-FRC) color depth, display 16. 7M colors
4.Incorporated edge type back-light (One Light Bar)
5.High luminance and contrast ratio, low reflection and wide viewing angle
6.DE (Data Enable) only
7.RoHS /TCO 6.0 ,ES6.0 Compliant
Specifications:
Parameter | Specification | Unit |
Active area | 476.64(H) × 268. 11 (V) | mm |
Number of pixels | 1920(H) ×1080(V) | pixels |
Pixel pitch | 0.24825(H) ×0.24825(V) | mm |
Pixel arrangement | RGB Vertical stripe | - |
Display colors | 16.7M | colors |
Display mode | Normally Black | - |
Dimensional outline | 495.6(H) × 292.2(V) × 10.7(D) typ. | mm |
Weight | 1900 (typ.) | g |
Surface Treatment | Anti-glare, 3H | - |
Back-light | Lower side 1-LED Light bar Type | - |
Absolute Maximum Ratings:
Parameter |
Symbol | Min. | Max. | Unit | Remarks |
Power Supply Voltage |
VDD |
-0.5 | 5.5 | V |
Ta = 25℃ |
Logic Supply Voltage |
VIN |
VSS-0.3 | VDD+0.3 | V | |
Operating Temperature |
TOP |
0 | +50 | C | |
Storage Temperature |
TST |
-20 | +60 | C |
Electrical Specifications:
Parameter | Min. | Typ. | Max. | Unit | Remarks | ||
Power Supply Voltage |
VDD |
4.5 | 5.0 | 5.5 | V |
|
|
Power Supply Current |
IDD |
- | 800 | 1400 | mA | ||
In-Rush Current | IRUSH | - | - | 3 | A | ||
Permissible Input Ripple Voltage |
VRF |
- | - | 200 | mV | VDD = 5.0V | |
High Level Differential Input Threshold Voltage |
VIH |
- |
- |
+100 | mV | ||
Low Level Differential InputThreshold Voltage |
VIL |
- 100 |
- |
- |
mV | ||
Differential input voltage | VID | 200 | - | 600 | mV | ||
Differential input common mode voltage | Vcm | 1.0 | 1.2 | 1.5 |
VIH=100mV, V =- 100mV |
||
LED Voltage |
VL |
3.05 | 3.2 | 3.4 | V | ||
LED Channel Voltage |
VL |
45.75 | 48 | 51 | V | ||
LED Channel Current |
IL |
- | 60 | - | mA | ||
LED Lifetime | 30,000 | - | - | Hrs | I =60 mA | ||
Power Consumption |
PD |
- | 4.9 | 6.25 | W | ||
PBL |
- | 11.52 | 12.24 | W | IL=60 mA | ||
Ptotal |
- | 16.42 | 18.49 | W |
Optical Specifications:
VDD = 5.0V, Frame rate = 60Hz, Clock = 78MHz, IBL = 120mA, Ta =25±2℃
Parameter | Symbol | Condition | Min. | Typ. | Max. | Unit | ||
Viewing Angle range |
Horizontal |
Θ3 |
CR > 10 |
- | 89 | - | Deg. | |
Θ9 |
- | 89 | - | Deg. | ||||
Vertical |
Θ12 |
- | 89 | - | Deg. | |||
Θ6 |
- | 89 | - | Deg. | ||||
Viewing Angle range |
Horizontal |
Θ3 |
CR > 5 |
- | 89 | - | Deg. | |
Θ9 |
- | 89 | - | Deg. | ||||
Vertical |
Θ12 |
- | 89 | - | Deg. | |||
Θ6 |
- | 89 | - | Deg. | ||||
Luminance Contrast ratio | CR |
Θ = 0° (Center) Normal Viewing Angle |
700 | 1000 | - | |||
Luminance of White |
Yw |
200 | 250 | - | cd/m2 | |||
White luminance uniformity | ΔY | 75 | 80 | - | % | |||
Reproduction of color |
White |
Wx |
0.283 | 0.313 | 0.343 | |||
Wy |
0.299 | 0.329 | 0.359 | |||||
Red |
Rx |
0.617 | 0.647 | 0.677 | ||||
Ry |
0.309 | 0.339 | 0.369 | |||||
Green |
Gx |
0.277 | 0.307 | 0.337 | ||||
Gy |
0.603 | 0.633 | 0.663 | |||||
Blue |
Bx |
0.116 | 0.146 | 0.176 | ||||
By |
0.026 | 0.056 | 0.086 | |||||
Response Time |
Rising+Fal ling | Tr +Tf | 14 | 21 | ms | |||
Cross Talk | CT | - | - | 2.0 | % |
Interface Connection:
Module Side Connector : UJU IS100-L300-C23 or Equivalent
User Side Connector : JAE FI-X30H or Equivalent
Pin No | Symbol | Function |
1 | RXO0- | Negative Transmission data of Pixel 0 (ODD) |
2 | RXO0+ | Positive Transmission data of Pixel 0 (ODD) |
3 | RXO1- | Negative Transmission data of Pixel 1 (ODD) |
4 | RXO1+ | Positive Transmission data of Pixel 1 (ODD) |
5 | RXO2- | Negative Transmission data of Pixel 2 (ODD) |
6 | RXO2+ | Positive Transmission data of Pixel 2 (ODD) |
7 | BIST | L(GND):Black, H(3.3V):Rotational Pattern |
8 | RXOC- | Negative Transmission Clock (ODD) |
9 | RXOC+ | Positive Transmission Clock (ODD) |
10 | RXO3- | Negative Transmission data of Pixel 3 (ODD) |
11 | RXO3+ | PositiveTransmission data of Pixel 3 (ODD) |
12 | RXE0- | Negative Transmission data of Pixel 0 (EVEN) |
13 | RXE0+ | Positive Transmission data of Pixel 0 (EVEN) |
14 | GND | Power Ground |
15 | RXE1- | Negative Transmission data of Pixel 1 (EVEN) |
16 | RXE1+ | Positive Transmission data of Pixel 1 (EVEN) |
17 | GND | Power Ground |
18 | RXE2- | Negative Transmission data of Pixel 2 (EVEN) |
19 | RXE2+ | Positive Transmission data of Pixel 2 (EVEN) |
20 | RXEC- | Negative Transmission Clock (EVEN) |
21 | RXEC+ | Positive Transmission Clock (EVEN) |
22 | RXE3- | Negative Transmission data of Pixel 3 (EVEN) |
23 | RXE3+ | Positive Transmission data of Pixel 3 (EVEN) |
24 | GND | Power Ground |
25 | NC | Not connection, this pin should be open |
26 | NC | Not connection, this pin should be open |
27 | NC | Not connection |
28 | VDD1 | Power Supply:+5V |
29 | VDD2 | |
30 | VDD3 |
Handling Precautions:
1.When the module is operating, do not lose CLK, ENAB signals. If any one of these signals is lost, the LCD panel would be damaged.
2.Obey the supply voltage sequence. If wrong sequence is applied, the module would be damaged.