15 Inch Tft Screen 1024x768 Full Viewing Angle Lvds Interface 20 Pins

General Description:

DV150X0M-N10 operation mode ADS, constant black display, transmissive , support color 16.7M , 72% NTSC, light source type WLED, 50K hours , including LED driver, weight 930g.

Features:

• LVDS interface with 1 pixel / clock
• High-speed response
• Low color shift image quality
• 6-bit +FRC color depth, display 16.7M colors
• Wide viewing angle
• DE (Data Enable) only mode
• ADS technology is applied for high display quality
• RoHS compliant

Specifications:

Absolute Maximum Ratings:

The followings are maximum values which, if exceed, may cause faulty operation or damage to the unit. The operational and non-operational maximum voltage and current values are listed in Table.

Note 1 : Wet bulb temperature should be 39℃ max. and no condensation of water.

Electrical Specifications:

Note 1 : The supply voltage is measured and specified at the interface connector of LCM.The current draw and power consumption specified is for VDD=3.3V,Test Pattern of power supply current.

Note 2 : The duration of rush current is about 2ms and rising time of Power Input is 1ms(min).

Backlight Electrical Specifications:

Interface Connection:

Optical Specification:

Note :

1. Viewing angle is the angle at which the contrast ratio is greater than 10. The viewing are determined for the horizontal or 3, 9 o‟clock direction and the vertical or 6, 12 o‟clock direction with respect to the optical axis which is normal to the LCD surface.

Operating Precautions:

1.Since a module is composed of electronic circuits, it is not strong to electrostatic discharge. Make certain that treatment persons are connected to ground through wrist band etc.

2.Remove the protective film slowly, keeping the removing direction approximate 30-degree not vertical from panel surface, If possible, under ESD control device like ion blower, and the humidity of working room should be kept over 50%RH to reduce the risk of static charge.