21.5 Inch Tft Display 1920x1080 Lvds Interface 30 Pins HR215WU1-120
General Description:
HR215WU1-120 display brightness 250 cd/m² (Typ.), contrast ratio 1000:1 (Typ.), viewing angle 89/89/89/89 (Typ.) (CR≥10),the display mode is constant black display, the recommended viewing angle is full view, the response time is 14 (Typ.)(Tr+Td) (ms).
Features:
1.LVDS Interface with 2 pixel / clock
2.High-speed response
3.6-bit (Hi-FRC) color depth, display 16. 7M colors
4.Incorporated edge type back-light (One Light Bar)
5.High luminance and contrast ratio, low reflection and wide viewing angle
6.DE (Data Enable) only
7.RoHS /TCO 6.0 ,ES6.0 Compliant
Specifications:
Parameter | Specification | Unit |
Active area | 476.64(H) × 268. 11 (V) | mm |
Number of pixels | 1920(H) ×1080(V) | pixels |
Pixel pitch | 0.24825(H) ×0.24825(V) | mm |
Pixel arrangement | RGB Vertical stripe | - |
Display colors | 16.7M | colors |
Display mode | Normally Black | - |
Dimensional outline | 495.6(H) × 292.2(V) × 10.7(D) typ. | mm |
Weight | 1900 (typ.) | g |
Surface Treatment | Anti-glare, 3H | - |
Back-light | Lower side 1-LED Light bar Type | - |
Absolute Maximum Ratings:
Parameter |
Symbol | Min. | Max. | Unit | Remarks |
Power Supply Voltage |
VDD |
-0.5 | 5.5 | V |
Ta = 25℃ |
Logic Supply Voltage |
VIN |
VSS-0.3 | VDD+0.3 | V | |
Operating Temperature |
TOP |
0 | +50 | C | |
Storage Temperature |
TST |
-20 | +60 | C |
Electrical Specifications:
Parameter | Min. | Typ. | Max. | Unit | Remarks | ||
Power Supply Voltage |
VDD |
4.5 | 5.0 | 5.5 | V |
|
|
Power Supply Current |
IDD |
- | 800 | 1400 | mA | ||
In-Rush Current | IRUSH | - | - | 3 | A | ||
Permissible Input Ripple Voltage |
VRF |
- | - | 200 | mV | VDD = 5.0V | |
High Level Differential Input Threshold Voltage |
VIH |
- |
- |
+100 | mV | ||
Low Level Differential InputThreshold Voltage |
VIL |
- 100 |
- |
- |
mV | ||
Differential input voltage | VID | 200 | - | 600 | mV | ||
Differential input common mode voltage | Vcm | 1.0 | 1.2 | 1.5 |
VIH=100mV, V =- 100mV |
||
LED Voltage |
VL |
3.05 | 3.2 | 3.4 | V | ||
LED Channel Voltage |
VL |
45.75 | 48 | 51 | V | ||
LED Channel Current |
IL |
- | 60 | - | mA | ||
LED Lifetime | 30,000 | - | - | Hrs | I =60 mA | ||
Power Consumption |
PD |
- | 4.9 | 6.25 | W | ||
PBL |
- | 11.52 | 12.24 | W | IL=60 mA | ||
Ptotal |
- | 16.42 | 18.49 | W |
Optical Specifications:
VDD = 5.0V, Frame rate = 60Hz, Clock = 78MHz, IBL = 120mA, Ta =25±2℃
Parameter | Symbol | Condition | Min. | Typ. | Max. | Unit | ||
Viewing Angle range |
Horizontal |
Θ3 |
CR > 10 |
- | 89 | - | Deg. | |
Θ9 |
- | 89 | - | Deg. | ||||
Vertical |
Θ12 |
- | 89 | - | Deg. | |||
Θ6 |
- | 89 | - | Deg. | ||||
Viewing Angle range |
Horizontal |
Θ3 |
CR > 5 |
- | 89 | - | Deg. | |
Θ9 |
- | 89 | - | Deg. | ||||
Vertical |
Θ12 |
- | 89 | - | Deg. | |||
Θ6 |
- | 89 | - | Deg. | ||||
Luminance Contrast ratio | CR |
Θ = 0° (Center) Normal Viewing Angle |
700 | 1000 | - | |||
Luminance of White |
Yw |
200 | 250 | - | cd/m2 | |||
White luminance uniformity | ΔY | 75 | 80 | - | % | |||
Reproduction of color |
White |
Wx |
0.283 | 0.313 | 0.343 | |||
Wy |
0.299 | 0.329 | 0.359 | |||||
Red |
Rx |
0.617 | 0.647 | 0.677 | ||||
Ry |
0.309 | 0.339 | 0.369 | |||||
Green |
Gx |
0.277 | 0.307 | 0.337 | ||||
Gy |
0.603 | 0.633 | 0.663 | |||||
Blue |
Bx |
0.116 | 0.146 | 0.176 | ||||
By |
0.026 | 0.056 | 0.086 | |||||
Response Time |
Rising+Fal ling | Tr +Tf | 14 | 21 | ms | |||
Cross Talk | CT | - | - | 2.0 | % |
Interface Connection:
Module Side Connector : UJU IS100-L300-C23 or Equivalent
User Side Connector : JAE FI-X30H or Equivalent
Pin No | Symbol | Function |
1 | RXO0- | Negative Transmission data of Pixel 0 (ODD) |
2 | RXO0+ | Positive Transmission data of Pixel 0 (ODD) |
3 | RXO1- | Negative Transmission data of Pixel 1 (ODD) |
4 | RXO1+ | Positive Transmission data of Pixel 1 (ODD) |
5 | RXO2- | Negative Transmission data of Pixel 2 (ODD) |
6 | RXO2+ | Positive Transmission data of Pixel 2 (ODD) |
7 | BIST | L(GND):Black, H(3.3V):Rotational Pattern |
8 | RXOC- | Negative Transmission Clock (ODD) |
9 | RXOC+ | Positive Transmission Clock (ODD) |
10 | RXO3- | Negative Transmission data of Pixel 3 (ODD) |
11 | RXO3+ | PositiveTransmission data of Pixel 3 (ODD) |
12 | RXE0- | Negative Transmission data of Pixel 0 (EVEN) |
13 | RXE0+ | Positive Transmission data of Pixel 0 (EVEN) |
14 | GND | Power Ground |
15 | RXE1- | Negative Transmission data of Pixel 1 (EVEN) |
16 | RXE1+ | Positive Transmission data of Pixel 1 (EVEN) |
17 | GND | Power Ground |
18 | RXE2- | Negative Transmission data of Pixel 2 (EVEN) |
19 | RXE2+ | Positive Transmission data of Pixel 2 (EVEN) |
20 | RXEC- | Negative Transmission Clock (EVEN) |
21 | RXEC+ | Positive Transmission Clock (EVEN) |
22 | RXE3- | Negative Transmission data of Pixel 3 (EVEN) |
23 | RXE3+ | Positive Transmission data of Pixel 3 (EVEN) |
24 | GND | Power Ground |
25 | NC | Not connection, this pin should be open |
26 | NC | Not connection, this pin should be open |
27 | NC | Not connection |
28 | VDD1 | Power Supply:+5V |
29 | VDD2 | |
30 | VDD3 |
Handling Precautions:
1.Do not expose the LCD module to a direct sunlight, for a long period of time to protect the module from the ultra violet ray.
2.When handling LCD modules and assembling them into cabinets, please be noted that long-term storage in the environment of oxidization or deoxidization gas and the use of such materials as reagent, solvent, adhesive,resin, etc. which generate these gasses, may cause corrosion and discoloration of the LCD modules.