21.5 Inch Tft Lcd Display 1920x1080 Lvds Interface 30 Pins HR215WU1-120
General Description:
HR215WU1-120 provide 250 cd/m² display brightness, it is assembled with WLED backlight, no backlight driver, no touch, the light uses a 17S4P WLED light-emitting side entry light source (bottom), the light source has a service life of 30K hours, exterior dimensions 495.6 x 292.2 mm (H x V), display area 476.64 x 268.11 mm.
Features:
1.LVDS Interface with 2 pixel / clock
2.High-speed response
3.6-bit (Hi-FRC) color depth, display 16. 7M colors
4.Incorporated edge type back-light (One Light Bar)
5.High luminance and contrast ratio, low reflection and wide viewing angle
6.DE (Data Enable) only
7.RoHS /TCO 6.0 ,ES6.0 Compliant
Specifications:
Parameter | Specification | Unit |
Active area | 476.64(H) × 268. 11 (V) | mm |
Number of pixels | 1920(H) ×1080(V) | pixels |
Pixel pitch | 0.24825(H) ×0.24825(V) | mm |
Pixel arrangement | RGB Vertical stripe | - |
Display colors | 16.7M | colors |
Display mode | Normally Black | - |
Dimensional outline | 495.6(H) × 292.2(V) × 10.7(D) typ. | mm |
Weight | 1900 (typ.) | g |
Surface Treatment | Anti-glare, 3H | - |
Back-light | Lower side 1-LED Light bar Type | - |
Absolute Maximum Ratings:
Parameter |
Symbol | Min. | Max. | Unit | Remarks |
Power Supply Voltage |
VDD |
-0.5 | 5.5 | V |
Ta = 25℃ |
Logic Supply Voltage |
VIN |
VSS-0.3 | VDD+0.3 | V | |
Operating Temperature |
TOP |
0 | +50 | C | |
Storage Temperature |
TST |
-20 | +60 | C |
Electrical Specifications:
Parameter | Min. | Typ. | Max. | Unit | Remarks | ||
Power Supply Voltage |
VDD |
4.5 | 5.0 | 5.5 | V |
|
|
Power Supply Current |
IDD |
- | 800 | 1400 | mA | ||
In-Rush Current | IRUSH | - | - | 3 | A | ||
Permissible Input Ripple Voltage |
VRF |
- | - | 200 | mV | VDD = 5.0V | |
High Level Differential Input Threshold Voltage |
VIH |
- |
- |
+100 | mV | ||
Low Level Differential InputThreshold Voltage |
VIL |
- 100 |
- |
- |
mV | ||
Differential input voltage | VID | 200 | - | 600 | mV | ||
Differential input common mode voltage | Vcm | 1.0 | 1.2 | 1.5 |
VIH=100mV, V =- 100mV |
||
LED Voltage |
VL |
3.05 | 3.2 | 3.4 | V | ||
LED Channel Voltage |
VL |
45.75 | 48 | 51 | V | ||
LED Channel Current |
IL |
- | 60 | - | mA | ||
LED Lifetime | 30,000 | - | - | Hrs | I =60 mA | ||
Power Consumption |
PD |
- | 4.9 | 6.25 | W | ||
PBL |
- | 11.52 | 12.24 | W | IL=60 mA | ||
Ptotal |
- | 16.42 | 18.49 | W |
Optical Specifications:
VDD = 5.0V, Frame rate = 60Hz, Clock = 78MHz, IBL = 120mA, Ta =25±2℃
Parameter | Symbol | Condition | Min. | Typ. | Max. | Unit | ||
Viewing Angle range |
Horizontal |
Θ3 |
CR > 10 |
- | 89 | - | Deg. | |
Θ9 |
- | 89 | - | Deg. | ||||
Vertical |
Θ12 |
- | 89 | - | Deg. | |||
Θ6 |
- | 89 | - | Deg. | ||||
Viewing Angle range |
Horizontal |
Θ3 |
CR > 5 |
- | 89 | - | Deg. | |
Θ9 |
- | 89 | - | Deg. | ||||
Vertical |
Θ12 |
- | 89 | - | Deg. | |||
Θ6 |
- | 89 | - | Deg. | ||||
Luminance Contrast ratio | CR |
Θ = 0° (Center) Normal Viewing Angle |
700 | 1000 | - | |||
Luminance of White |
Yw |
200 | 250 | - | cd/m2 | |||
White luminance uniformity | ΔY | 75 | 80 | - | % | |||
Reproduction of color |
White |
Wx |
0.283 | 0.313 | 0.343 | |||
Wy |
0.299 | 0.329 | 0.359 | |||||
Red |
Rx |
0.617 | 0.647 | 0.677 | ||||
Ry |
0.309 | 0.339 | 0.369 | |||||
Green |
Gx |
0.277 | 0.307 | 0.337 | ||||
Gy |
0.603 | 0.633 | 0.663 | |||||
Blue |
Bx |
0.116 | 0.146 | 0.176 | ||||
By |
0.026 | 0.056 | 0.086 | |||||
Response Time |
Rising+Fal ling | Tr +Tf | 14 | 21 | ms | |||
Cross Talk | CT | - | - | 2.0 | % |
Interface Connection:
Pin No | Symbol | Function |
1 | RXO0- | Negative Transmission data of Pixel 0 (ODD) |
2 | RXO0+ | Positive Transmission data of Pixel 0 (ODD) |
3 | RXO1- | Negative Transmission data of Pixel 1 (ODD) |
4 | RXO1+ | Positive Transmission data of Pixel 1 (ODD) |
5 | RXO2- | Negative Transmission data of Pixel 2 (ODD) |
6 | RXO2+ | Positive Transmission data of Pixel 2 (ODD) |
7 | BIST | L(GND):Black, H(3.3V):Rotational Pattern |
8 | RXOC- | Negative Transmission Clock (ODD) |
9 | RXOC+ | Positive Transmission Clock (ODD) |
10 | RXO3- | Negative Transmission data of Pixel 3 (ODD) |
11 | RXO3+ | PositiveTransmission data of Pixel 3 (ODD) |
12 | RXE0- | Negative Transmission data of Pixel 0 (EVEN) |
13 | RXE0+ | Positive Transmission data of Pixel 0 (EVEN) |
14 | GND | Power Ground |
15 | RXE1- | Negative Transmission data of Pixel 1 (EVEN) |
16 | RXE1+ | Positive Transmission data of Pixel 1 (EVEN) |
17 | GND | Power Ground |
18 | RXE2- | Negative Transmission data of Pixel 2 (EVEN) |
19 | RXE2+ | Positive Transmission data of Pixel 2 (EVEN) |
20 | RXEC- | Negative Transmission Clock (EVEN) |
21 | RXEC+ | Positive Transmission Clock (EVEN) |
22 | RXE3- | Negative Transmission data of Pixel 3 (EVEN) |
23 | RXE3+ | Positive Transmission data of Pixel 3 (EVEN) |
24 | GND | Power Ground |
25 | NC | Not connection, this pin should be open |
26 | NC | Not connection, this pin should be open |
27 | NC | Not connection |
28 | VDD1 | Power Supply:+5V |
29 | VDD2 | |
30 | VDD3 |
Handling Precautions:
1.Do not use polychloroprene. If you use it, there is some possibility of generating Cl2 gas that influences the reliability of the connection between LCD panel and driver IC.
2.Do not put a laminate film on LCD module, after peeling of the original one. If you put on it, it may cause discoloration or spots because of the occurrence of air gaps between the polarizer and the film.