12.1 Inch Tft 1280x800 Lvds Interface 20 Pins Industrial Medical Lcd
General Description:
EV121WXM-N10 display mode ADS, constant black display, transmissive, LCD brightness 400cd/m2 (Typ.), contrast ratio 1200:1 (Typ.) (transmissive), display color 16.7M (8-bit), display color gamut 48% NTSC (CIE1931), response time 35 (Typ.) (Tr+Td) (ms).The best viewing angle is 88/88/88/88. The best viewing angle is full view.
Features:
1.Cell Thickness:1.0t
2.RoHS Compliant
3.Display Mode: ADS
4.Interface: LVDS, 1 port 4 pair
5.Number of colors: Real 8 bit, cannot be selected
Specifications:
Parameter | ITEMS | Unit | Remark |
Active area | 261.12(H) ×163.2 (V) | mm | |
Dimensional Outline | 277.7(W)×180.6(V) × 8.7(D) | mm | |
Border(L/R/U/D) | 4.0/4.0/3.2/3.0 | ||
Number of pixels | 1280 (H) ×800 (V) | pixels | |
Pixel pitch | 0.07(H) × 0.2(V) | mm | |
Pixel arrangement | 1P2D | ||
Luminance | Typ 400 nit, Min 300 nit | nit | |
Transmittance | 5.8%(typ) | without APF | |
Color Gamut | 48%(typ) | ||
Display colors | 16.7M | ||
Display mode | Normally Black | ||
Contrast Ratio | 1200:1 | ||
Response Time | 25 | ms | |
Optima Viewing Direction (Human Eye) |
88/88/88/88 | Deg. | CR>10 |
Driver IC | HX8255-A | ||
Weight | TBD | gram |
Absolute Maximum Ratings:
Parameter | Symbol | Min. | Max. | Unit | Remarks |
LC operating Voltage | VOP | 5.0 | V | Ta=25+/-5°C | |
Operating Temperature(Humidity) | TOP | -20 | +70 | ℃ |
|
RH(60°) | 90 | % | |||
Storage Temperature(Humidity) | TST | -30 | +80 | ℃ | |
RH(60° ) | 90 | % |
Electrical Specifications:
Parameter | Symbol | Value | Range | Unit |
TFT Gate ON Voltag | VGH | 23 |
- |
V |
TFT Gate OFF Voltage | VGL | -8 |
- |
V |
TFT Common Electrode Voltage | Vcom | 3.5 | 2~5 | V |
TFT Kick-Back Voltage Max | ΔVp Max |
— |
— |
V |
TFT Kick-Back Voltage Min | ΔVp Min |
— |
— |
V |
LCD Panel Signal Processing Board |
VDD |
3.3 |
- |
V |
LCD Panel Signal Current |
— |
0.6 |
TBD |
A |
Backlight Input Voltage |
— |
12 |
- |
V |
Backlight Input Current |
— |
0.45 |
- |
A |
LCD Panel Display Power |
— |
7.1 | TBD | W |
Backlight Power |
— |
5 | TBD | W |
Parameter | Symbol | Min | Typ | Max | Unit | Condition |
Supply current | IDD | - | 100 | - | mA | |
LVDS DC specifications | ||||||
Differential input high threshold | VTH | - | - | +100 | mV | VIC =1.2V |
Differential input low threshold | VTL | -100 | - | - | mV | |
LVDS common mode voltage | VIC | 0.7 | - | 1.6 | V | |
LVDS swing voltage | VID | ±100 | - | ±600 | mV | |
Mini-LVDS DC specifications | ||||||
Output differential voltage range | VOD | ±170 | ±200 | ±230 | mV | PI=14KΩ RL=100Ω (TA =25℃ ) |
Output differential voltage deviation | 0.64 | - | 0.96 | mV | ||
Output offset voltage range | VOS | 1.0 | 1.2 | 1.4 | V | |
Output offset voltage deviation | 1 | - | 1.4 | V |
Optical Specification:
Parameter | Symbol | Condition | Min. | Typ. | Max. | Unit | |
Viewing Angle Range |
Horizontal |
Θ3 |
CR>10 |
88 |
- |
Deg. | |
Θ9 | 88 |
- |
Deg. | ||||
Vertical |
Θ12 | 88 |
- |
Deg. | |||
Θ6 | 88 |
- |
Deg. | ||||
Luminance | Lum | Θ = 0. | 300 | 400 |
- |
nit | |
Contrast ratio | CR | Θ = 0. | 800 | 1200 |
- |
||
Transmittance | Tr | 5.2 | 5.8 |
- |
% | ||
Color Gamut | CG |
- |
48 |
- |
% | ||
Reproduction of color |
Red |
Rx |
Θ = 0. |
0.556 | 0.596 | 0.636 | |
Ry | 0.292 | 0.332 | 0.372 | ||||
Green |
Gx | 0.295 | 0.335 | 0.375 | |||
Gy | 0.512 | 0.552 | 0.592 | ||||
Blue |
Bx | 0.109 | 0.149 | 0.189 | |||
By | 0.079 | 0.119 | 0.159 |
Interface Connection:
1 | VCC | Power supply |
2 | VCC | |
3 | N C | Not connect |
4 | GND | Ground |
5 | D0- | Pixel data |
6 | D0+ | |
7 | GND | Ground |
8 | D1- | Pixel data |
9 | D1+ | |
10 | GND | Ground |
11 | D2- | Pixel data |
12 | D2+ | |
13 | GND | Ground |
14 | CLK- | Pixel data |
15 | CLK+ | |
16 | GND | Ground |
17 | SDA | Not connect |
18 | SCL | Not connect |
19 | D3- | Pixel data |
20 | D3+ |
Handling Precautions:
1.Remove the protective film slowly, keeping the removing direction approximate 30-degree not vertical from panel surface, If possible, under ESD control device like ion blower, and the humidity of working room should be kept over 50%RH to reduce the risk of static charge.
2.It is indispensable to drive the LCD within the specified voltage limit since the higher Voltage than the limit causes the shorter LCD's life. An electro-chemical reaction due to DC causes undesirable deterioration of the LCD so that the use of DC drive should avoid.