Advantages :
1. LENS
Some monoculars in the market use Spherical lenses while THH3 uses F1.0 Aspherical lens. The aspherical lens gives the benefit of lighter weight and better transmissivity to make a better image. The cost difference between the two kinds of lens is approx. 150.00USD
2. SENSOR
Some monocular in the market are made from Chinese detector while THH3 uses latest Generation detector from ULIS, of which the image quality, stability, and reliability is much higher than Chinese detector, especially when used after 2 years in low temperature and high humidity environment. The cost difference between western and Chinese detector is about 300USD.
3. DISPLAY
Some monocular in the market uses 0.25” LCOS screen of which the resolution is 720*540 while THH3 uses 0.39” 1024*768 AMOLED, the clearance and image performance is at least 4 times better than LCOS. Especially when under the low-temperature environment of -40℃ , THH3 can still work without problem but other imagers with LCOS screen can not work even under -15℃. The cost difference between OLED and LCOS is approx. 250USD
SPECIFICATION | ||
THERMAL IMAGING | ||
Model | THH3(15) | THH3(25) |
Sensor type | Vanadium oxide uncooled detector | |
Image size | 384 X 288 | |
Response band | 8~14um | |
NETD Noise equivalent temperature diference | < 40mk(@25*C,F#=1.0) | |
F data | 1 | |
Lens focal length | 15mm | 25mm |
Field of view angle | 25°* 19° | 16°*12° |
IMAGE DISPLAY | ||
Monitor | 0.39 inches,AMOLED,1024*768 | |
Image mode | white hot, black hot, cold red,red hot | |
SYSTEM FUNCTIONS | ||
Digital zoom | Support(1X/2X/4X) | |
Crossline | Support | |
WIFI hotspot | Support | |
Ranging | Support | |
Picture in picture | Support | |
Video | Support | |
White light illumination | Support | |
Storage | Support | |
OTHER | ||
Battery full power usage time | ≥5h(Can add charging treasure to increase time) | |
Charging system | charger | |
Operating temperature | —40~60°C | |
Protection level | IP67 | |
Anti-fall rating | 2m | |
Installation method | Handheld | |
Size | 74*66* 189(mm) | |
Weight | <0.5kg |
SALES & SERVICE
We try our best to make sure all customers can get proper training of our device and good after-sell service when any kind of failure occurs.
We understand that as a manufacturer it is important to work tightly with our distributors to support customers from different regions.
QUALITY CONTROL
We understand that in some cases, lives may depend on the performance of our products, that is why every unit that leaves our facility must pass tough quality control standards testing.
It is our mission to continue to design, build, test and ship the very best optoelectronics devices on the market.