Thermal Front Clip ON
Thermal Clip On Product Description
Find the features that are right for you
▼ NightSeer Clip-On Systems eliminate the typical, inconvenient requirements of removing an existing day scope from a weapon, or the need to replace the day scope with a dedicated thermal sight
▼ Ergonomic design with five-position thumbstick for one-hand operation
▼ Night-time shooting advantages:
Using NightSeer includes several benefits over night hunting with traditional optics or even thermal or night vision devices. Attaching NightSeer to a traditional scope delivers the same creature comforts of shooting with day optics you are accustomed to, including your existing reticle and eye relief. The NightSeer even allows you to continue utilizing your riflescope’s variable magnification.
▼ Limited 2-year warranty
Thermal Imager Clip On Technical Data
Thermal Imager Scope NightSeer 350 Series Technical Data Sheet | |
NS350-C | |
Microbolometer | |
Type | Uncooled |
Resolution, pixels | 384×288 |
Frame Rate, Hz | 50 |
Pixel size, um | 17 |
NETD | less than 50mk |
Optical Characteristics | |
Objective Lens | 50mm, F/1.1 |
Magnification, X | 1 |
Zoom | 2x/PIP/4x |
Eye Relief, mm | 24mm |
Dioptre Adjustment, D | / |
FOV | 7.4°×5.6° |
Close-up range,m | 5 |
Display | |
Type | OLED |
Resolution, pixel | 1024×768 |
Power Supply | |
Battery Type | 2XCR123 |
Power Supply | 3.6~7.2 |
External Power Supply | 5v USB |
Operation Time on a battery set(standard version),h | 5 |
Operation Time on external battery pack(standard version),h(13000mAh) | 44 |
Video recorder(optional) | |
Video/Photo format | avi/jpg |
Built-in memory(optional) | 32G |
Wifi Channel(optional) | |
Frequency | 2.4 |
Reception range,m | 15 |
Physical Parameters | |
Degree of Protection | IP67 |
Operation Temperature | —25°C~+50°C |
Storage Temperature | —40°C~+70°C |
Shock and Vibration | 1000g/ms |
MTBF | More than 800h |
Weight without batteries,g | 425 |
Dimension, mm | 167×65×67 |
We understand that lives may depend on the performance of our products, that is why every unit that leaves our facility must pass tough quality control standards testing.
It is our mission to continue to design, build, test and ship the very best optoelectronics devices on the market.