Outdoor Hunting Use Thermal Clip On , Multi-Function Thermal Imaging Gun Scope Multifunctional thermal imaging device (camera) for image clarifying and observation
The NightSeer thermal clip on is one of the most advanced Night Vision Clip-On systems for shooting at night. It converts your existing day scope to thermal and provides excellent target acquisition and aiming capabilities varmint hunter, military, law enforcement, or security personnel.
The NightSeer335C is milled from a magnesium ingot CNC and equipped with high-quality germanium lenses. It can be used as a hand-held monocular and an adapter (auxiliary device).
Advantages:
▼ Ergonomic design with five-position thumbstick for one-hand operation
▼ Weather-dependent image optimization
▼ Unique one-thumb operation
▼ Intelligent coloration palette
▼ Rapid start-up
▼ Easy and intuitive drop-down user interface
▼ Limited 2-year warranty
Thermal Imager Clip-On Technical Data
Model | NS335-C |
Microbolometer |
|
Type | Uncooled |
Resolution, pixels | 384×288 |
Frame Rate, Hz | 50 |
Pixel size, um | 17 |
NETD | less than 50mk |
Optical Characteristics |
|
Objective Lens | 35mm, F/1.1 |
Magnification, X | 1 |
Zoom | 2x/PIP/4x |
Eye Relief, mm | 24mm |
Dioptre Adjustment, D | / |
FOV | 10.6°×8.0° |
Close-up range,m | 5 |
Display |
|
Type | OLED |
Resolution, pixel | 1024×768 |
Power Supply |
|
Battery Type | 2XCR123 |
Power Supply | 3.6~7.2 |
External Power Supply | 5v USB |
Operation Time on a battery set(standard version),h | 5 |
Operation Time on external battery pack(standard version),h(13000mAh) | 44 |
Video recorder(optional) |
|
Video/Photo format | avi/jpg |
Built-in memory(optional) | 32G |
Wifi Channel(optional) |
|
Frequency | 2.4 |
Reception range,m | 15 |
Physical Parameters |
|
Degree of Protection | IP67 |
Operation Temperature | —2°C~+50°C |
Storage Temperature | —40°C~+70°C |
Shock and Vibration | 1000g/ms |
MTBF | More than 800h |
Weight without batteries,g | 400 |
Dimension, mm | 150×65×67 |
Thermal Clip On Quality Control
We understand that lives may depend on the performance of our products, that is why every unit that leaves our facility must pass tough quality control standards testing.
It is our mission to continue to design, build, test and ship the very best optoelectronic devices on the market.