NightSeer Clip-On Systems eliminate the typical inconvenient requirements of removing an existing day scope from a weapon, or the need to replace the day scope with a dedicated thermal sight.
All units are waterproof, recoil-tested and bore-sighted to tolerances of less than 1 MOA, so no re-zeroing is required by the operator.
It also allows users to maintain consistent eye relief and shooting position. No re-training is necessary, because the user isn’t required to learn how to operate a totally new device.
Features of Multifunctional Thermal Imager:
Technical Data Sheet of Thermal Imager NightSeer335/350 Series | ||
NS335-C | NS350-C | |
Microbolometer | ||
Type | Uncooled | Uncooled |
Resolution, pixels | 384×288 | 384×288 |
Frame Rate, Hz | 50 | 50 |
Pixel size, um | 17 | 17 |
Optical Characteristics | ||
Objective Lens | 35mm, F/1.1 | 50mm, F/1.1 |
Magnification, X | 1 | 1 |
Zoom | 2x/PIP/4x | 2x/PIP/4x |
Eye Relief, mm | 24mm | 24mm |
Dioptre Adjustment, D | / | / |
FOV | 10.6°×8.0° | 7.4°×5.6° |
Close-up range,m | 5 | 5 |
Display | ||
Type | OLED | OLED |
Resolution, pixel | 1024×768 | 1024×768 |
Detection Range (1.7m target) | 1350 | 1800 |
Recognition Range (1.7m) | 450 | 600 |
Detection Range (2.3m target) | 1800 | 2400 |
Recognition Range (2.3m) | 600 | 800 |
Reticle | ||
Accuracy(per pixel) | / | / |
Click range | / | / |
Power Supply | ||
Battery Type | 2XCR123 | 2XCR123 |
Power Supply | 3.6~7.2 | 3.6~7.2 |
External Power Supply | 5v USB | 5v USB |
Operation Time on a battery set(standard version),h | 5 | 5 |
Video recorder | ||
Video/Photo format | avi/jpg | avi/jpg |
Built-in memory(optional) | 32G | 32G |
Wifi Channel(optional) | ||
Frequency | 2.4 | 2.4 |
Reception range,m | 15 | 15 |
Physical Parameters | ||
Degree of Protection | IP67 | IP67 |
Operation Temperature | —25℃~+50℃ | —25℃~+50℃ |
Storage Temperature | —40℃~+70℃ | —40℃~+70℃ |
MTBF | More than 800h | More than 800h |
Weight without batteries,g | 400 | 425 |
Dimension, mm | 150×61×67 | 167×65×67 |
SALES & SERVICE
We understand that as a manufacturer it is important to work tightly with our distributors to support customers from different regions. We try our best to make sure all customers can get proper training of our device and good after-sell service when any kind of failure occurs.