Matte Black Quick Release Uncooled Thermal Imager Compatible With Various Day Optics
The ORION series multifunctional thermal imagers are compatible With Various Day Optics. Attachment allows turning the majority of day sights with lens diameters from 42mm to 65mm into a thermal sight, ensuring the constant position of POI. The quick-release mount allows remove it from the scope in seconds.
With IP67 water protection class core, thermal imaging devices can be operated in the conditions of precipitation of any intensity and withstand a short underwater submersion.
Technical Data Sheet | ||
Orion335C | Orion350C | |
Detector | ||
Type | Uncooled | |
Resolution | 384×288 | |
Frame Rate | 50Hz | |
Pitch | 17μm | |
Spectral range | 8-14μm | |
NETD | less then 50mk | |
Optical Characteristics | ||
Objective lens | 35mm | 50mm |
Magnification | 1.4x | 2.0x |
FOV | 10.6°×8.0° | 7.4°×5.6° |
Close-up range | 5m | |
Eye Relief | 60mm | |
Dioptre Adjustment | -5D-4D | |
Functions | ||
Zoom | 2x/4x/PIP | |
Palette | 10 optional(can be customized) | |
Startup time | less than 5 seconds | |
Startup image | Can be customized | |
Menu and information | GUI(Can be customized) | |
Image Enhancement | DDE | |
Contrast and Brightness | AGC | |
Online update | Both code and GUI resources | |
reticle type | 5 optional(Can be customized) | |
ballistic and zeroing | 5 types can be created by user | |
Range finder | Software Approximate ranging | |
Display | ||
Type | OLED | |
Resolution | 1024×768 | |
Power Supply | ||
Battery | 2×CR123 | |
External Power Supply | 5V micro USB | |
Operation Time | 5h with WIFI OFF 2h with WIFI ON | |
Physical Characteristics | ||
weight without battery | 450g | 500g |
size,(mm) | 170×61×67 | 180×61×65 |
Environmental Compatibility | ||
Waterproof | IP67 | |
Operating Temperature | -25℃-50℃ | |
Storage Temperature | -40℃-70℃ | |
shock tolerance | 1200g/ms | |
Wi-fi | ||
Frequency | 2.4GHz | |
Standard | 802,11 b/g/n | |
Line-of-sight reception range, m | 15 | |
On-Board Recording | ||
Capacity | 32G |
SALES & SERVICE
We understand that as a manufacturer it is important to work tightly with our distributors to support customers from different regions. We try our best to make sure all customers can get proper training of our device and good after-sell service when any kind of failure occurs.
QUALITY CONTROL
We understand that, in some cases, lives may depend on the performance of our products, that is why every unit that leaves our facility must pass tough quality control standards testing.
It is our mission to continue to design, build, test and ship the very best optoeletronics devices on the market.