Nightseer series Multi-functional Thermal Imager is a compact and powerful scope designed specifically for hunters. Manufactured from 6061 Aircraft-grade aluminum and uses nitrogen purging for waterproof function. The Nightseer series has intuitive, ergonomic controls to put advanced IR technology in the palm of your hand.
Benefits
Accurate and reliable: High-precision position measurement capability over a long-range.
Versatile: Clear view at day and night, even in total darkness or through the smoke.
Handy: Weighs just 400g and is extremely compact.
Silent: No acoustic detection.
Long battery life: Reach up to 5 hours
Fields of application
Defense and security technology: Observation, orientation, reconnaissance and target acquisition.
Police and border protection: Observation, identification and location.
Technical Data Sheet | |
NS350-C | |
Microbolometer | |
Type | Uncooled |
Resolution, pixels | 384×288 |
Frame Rate, Hz | 50 |
Pixel size, um | 17 |
Optical Characteristics | |
Objective Lens | 50mm, F/1.1 |
Magnification, X | 1 |
Zoom | 2x/PIP/4x |
Eye Relief, mm | 24mm |
Dioptre Adjustment, D | / |
FOV | 7.4°×5.6° |
Close-up range,m | 5 |
Display | |
Type | OLED |
Resolution, pixel | 1024×768 |
Detection Range (1.7m target) | 1800 |
Recognition Range (1.7m) | 600 |
Detection Range (2.3m target) | 2400 |
Recognition Range (2.3m) | 800 |
Reticle | |
Accuracy(per pixel) | / |
Click range | / |
Power Supply | |
Battery Type | 2XCR123 |
Power Supply | 3.6~7.2 |
External Power Supply | 5v USB |
Operation Time on a battery set(standard version),h | 5 |
Video recorder | |
Video/Photo format | avi/jpg |
Built-in memory(optional) | 32G |
Wifi Channel(optional) | |
Frequency | 2.4 |
Reception range,m | 15 |
Physical Parameters | |
Degree of Protection | IP67 |
Operation Temperature | —25℃~+50℃ |
Storage Temperature | —40℃~+70℃ |
MTBF | More than 800h |
Weight without batteries,g | 425 |
Dimension, mm | 167×65×67 |
QUALITY CONTROL
We understand that, in some cases, lives may depend on the performance of our products, that is why every unit that leaves our facility must pass tough quality control standards testing.
It is our mission to continue to design, build, test and ship the very best optoeletronics devices on the market.
SALES & SERVICE
We understand that as a manufacturer it is important to work tightly with our distributors to support customers from different regions. We try our best to make sure all customers can get proper training of our device and good after-sell service when any kind of failure occurs.