The THH3 captures clear thermal imaging and leverages a refined user interface to quickly detect objects of interest in complete darkness and through glaring light or haze. A rugged, IP67-rated housing and intuitive controls allow single-hand operation in harsh weather conditions, maintaining reliable thermal imaging in the most demanding outdoor environments.
Difference between THH3 and other competitors on the market :
1. DISPLAY
Some monoculars in the market use 0.25” LCOS screen of which the resolution is 720*540 while THH3 uses 0.39” 1024*768 AMOLED, the clearance and image performance is at least 4 times better than LCOS. Especially when under a low-temperature environment of -40℃ THH3 can still work without problem but other imagers with LCOS screen can not work even under -15℃. The cost difference between OLED and LCOS is approx 250USD
2. Encapsulation
THH3 can be immersed in water without a problem and can hold a drop from 2 meters, while Some monocular in the market can not take.
3. SENSOR
Some monoculars in the market are made from Chinese detectors while THH3 uses the latest Generation detector from ULIS, of which the image quality, stability, and reliability are much higher than Chinese detectors, especially when used after 2 years in low temperature and high humidity environment. The cost difference between western and Chinese detectors is about 300USD.
SPECIFICATION | ||
THERMAL IMAGING | ||
Model | THH3(15) | THH3(25) |
Sensor type | Vanadium oxide uncooled detector | |
Image size | 384 X 288 | |
Response band | 8~14um | |
NETD Noise equivalent temperature diference | < 40mk(@25*C,F#=1.0) | |
F data | 1 | |
Lens focal length | 15mm | 25mm |
Field of view angle | 25°* 19° | 16°*12° |
IMAGE DISPLAY | ||
Monitor | 0.39 inches,AMOLED,1024*768 | |
Image mode | white hot, black hot, cold red,red hot | |
SYSTEM FUNCTIONS | ||
Digital zoom | Support(1X/2X/4X) | |
Crossline | Support | |
WIFI hotspot | Support | |
Ranging | Support | |
Picture in picture | Support | |
Video | Support | |
White light illumination | Support | |
Storage | Support | |
OTHER | ||
Battery full power usage time | ≥5h(Can add charging treasure to increase time) | |
Charging system | charger | |
Operating temperature | —40~60°C | |
Protection level | IP67 | |
Anti-fall rating | 2m | |
Installation method | Handheld | |
Size | 74*66* 189(mm) | |
Weight | <0.5kg |
SALES & SERVICE
We understand that as a manufacturer it is important to work tightly with our distributors to support customers from different regions. We try our best to make sure all customers can get proper training of our device and good after-sell service when any kind of failure occurs.
QUALITY CONTROL
We understand that, in some cases, lives may depend on the performance of our products, that is why every unit that leaves our facility must pass tough quality control standards testing.
It is our mission to continue to design, build, test and ship the very best optoelectronic devices on the market.