The thermal imaging monocular NightSeer350 is a compact device that has been designed to observe areas irrespective of available light for human or wildlife presence. It is also possible to remotely check buildings and vehicles.
Thermal Sensor with 384*288 pixel HD resolution - the powerful thermal sensor gives the ability to catch heat signatures and let you see clearly in total darkness.
Smart Rangefinder - thermal monocular accurately measures precise distances to a subject using the built-in rangefinder.
E-Zoom - this enables the device to focus on distant objects with clarity.
High-Resolution Video Recording & Photos, Wi-Fi Streaming - allow you to record and stream video, share pictures from your hunting trip with friends.
Technical Data Sheet of Thermal Imager NightSeer335/350 Series | |
NS350-H | |
Microbolometer | |
Type | Uncooled |
Resolution, pixels | 384×288 |
Frame Rate, Hz | 50 |
Pixel size, um | 17 |
NETD | less than 50mk |
Optical Characteristics | |
Objective Lens | 50mm, F/1.1 |
Magnification, X | 2.62 |
Zoom | 2x/PIP/4x |
Eye Relief, mm | 15mm |
Dioptre Adjustment, D | ±5 |
FOV | 7.4°×5.6° |
Close-up range,m | 5 |
Display | |
Type | OLED |
Resolution, pixel | 1024×768 |
Detection Range (1.7m target) | 1800 |
Recognition Range (1.7m) | 600 |
Detection Range (2.3m target) | 2400 |
Recognition Range (2.3m) | 800 |
Power Supply | |
Battery Type | 2XCR123 |
Power Supply | 3.6~7.2 |
External Power Supply | 5v USB |
Operation Time on a battery set (standard version),h |
5 |
Operation Time on the external battery pack (standard version),h(13000mAh) |
44 |
Video recorder(optional) | |
Video/Photo format | avi/jpg |
Built-in memory(optional) | 32G |
Wifi Channel(optional) | |
Frequency | 2.4 |
Reception range,m | 15 |
Physical Parameters | |
Degree of Protection | IP67 |
Operation Temperature | —25℃~+50℃ |
Storage Temperature | —40℃~+70℃ |
Shock and Vibration | 1000g/ms |
MTBF | More than 800h |
Weight without batteries,g | 410 |
Dimension, mm | 167×65×67 |
SALES & SERVICE
We understand that as a manufacturer it is important to work tightly with our distributors to support customers from different regions. We try our best to make sure all customers can get proper training of our device and good after-sell service when any kind of failure occurs.
QUALITY CONTROL
We understand that, in some cases, lives may depend on the performance of our products, that is why every unit that leaves our facility must pass tough quality control standards testing.
It is our mission to continue to design, build, test and ship the very best optoelectronic devices on the market.