Description
Features
▼ NightSeer Clip-On Systems eliminate the typical, inconvenient requirements of removing an existing day scope from a weapon, or the need to replace the day scope with a dedicated thermal sight
▼ Ergonomic design with five-position thumbstick for one-hand operation
▼Weather-dependent image optimization
▼Intelligent coloration
▼ Limited 2-year warranty
Technical Data
Thermal Imager Scope NightSeer 350 Series Technical Data Sheet | |
NS350-C | |
Microbolometer | |
Type | Uncooled |
Resolution, pixels | 384×288 |
Frame Rate, Hz | 50 |
Pixel size, um | 17 |
NETD | less than 50mk |
Optical Characteristics | |
Objective Lens | 50mm, F/1.1 |
Magnification, X | 1 |
Zoom | 2x/PIP/4x |
Eye Relief, mm | 24mm |
Dioptre Adjustment, D | / |
FOV | 7.4°×5.6° |
Close-up range,m | 5 |
Display | |
Type | OLED |
Resolution, pixel | 1024×768 |
Power Supply | |
Battery Type | 2XCR123 |
Power Supply | 3.6~7.2 |
External Power Supply | 5v USB |
Operation Time on a battery set(standard version),h | 5 |
Operation Time on external battery pack(standard version),h(13000mAh) | 44 |
Video recorder(optional) | |
Video/Photo format | avi/jpg |
Built-in memory(optional) | 32G |
Wifi Channel(optional) | |
Frequency | 2.4 |
Reception range,m | 15 |
Physical Parameters | |
Degree of Protection | IP67 |
Operation Temperature | —25°C~+50°C |
Storage Temperature | —40°C~+70°C |
Shock and Vibration | 1000g/ms |
MTBF | More than 800h |
Weight without batteries,g | 425 |
Dimension, mm | 167×65×67 |
Thermal Clip On Quality Control
We understand that lives may depend on the performance of our products, that is why every unit that leaves our facility must pass tough quality control standards testing.
It is our mission to continue to design, build, test and ship the very best optoelectronic devices on the market.