The Orion series is the compact thermal imaging scopes developed for the continues work under any weather and environmental conditions. Two modifications of objective lenses allow choosing a perfect unit for your needs where a 35 mm lens designed for short-range shooting, while the 50 mm lens model will be great for medium-range missions.
Features:
- Rugged with the best precision
- 1200g test on each unit before leaving the factory
- Full condition operation
- The military standard can work even at -40 degree
- Detection range 1800m for human size target
- High image frequency of 50Hz
- Weather-dependent image optimization
- Fully Waterproof
Technical Data Sheet
Orion350RL | |
Detector | |
Type | Uncooled |
Resolution | 384×288 |
Frame Rate | 50Hz |
Pitch | 17μm |
Spectral range | 8-14μm |
NETD | less then 50mk |
Optical Characteristics | |
Objective lens | 50mm |
Magnification | 2.0x |
FOV | 7.4°×5.6° |
Close-up range | 5m |
Eye Relief | 60mm |
Dioptre Adjustment | -5D-4D |
Functions | |
Zoom | 2x/4x/PIP |
Palette | 10 optional(can be customized) |
Startup time | less than 5 seconds |
Startup image | Can be customized |
Menu and information | GUI(Can be customized) |
Image Enhancement | DDE |
Contrast and Brightness | AGC |
Online update | Both code and GUI resources |
reticle type | 5 optional(Can be customized) |
ballistic and zeroing | 5 types can be created by user |
Range finder | Software Approximate ranging |
Display | |
Type | OLED |
Resolution | 1024×768 |
Power Supply | |
Battery | 2×CR123 |
External Power Supply | 5V micro USB |
Battery life | 5h |
Physical Characteristics | |
weight without battery | 600g |
size,(mm) | 180×100×65 |
Environmental Compatibility | |
Waterproof | IP67 |
Operating Temperature | -25℃-50℃ |
Storage Temperature | -40℃-70℃ |
shock tolerance | 1200g/ms |
Wi-fi | |
Frequency | 2.4GHz |
Standard | 802,11 b/g/n |
Line-of-sight reception range, m | 15 |
Laser Rangefinder | |
Safety class for laser equipment according to IEC 60825-1:2014 | 1 |
measuring range, m | 5-600 |
Measurement accuracy, m | ± 1 |
SALES & SERVICE
We understand that as a manufacturer it is important to work tightly with our distributors to support customers from different regions. We try our best to make sure all customers can get proper training of our device and good after-sell service when any kind of failure occurs.
QUALITY CONTROL
We understand that, in some cases, lives may depend on the performance of our products, that is why every unit that leaves our facility must pass tough quality control standards testing.
It is our mission to continue to design, build, test and ship the very best optoelectronics devices on the market.