Pressure Solar Panel Anti Freezing 14mm Condensor Heat Pipe Solar Collector Solar Water Heater
Material
1. Manifold: Aluminum alloy
2. Channel: Red copper
3. Heat pipe: Copper
4. Bracket: Aluminum alloy/ Galvanized steel/ Stainless steel
5. Insulation material: Rock wool
Detailed Product Description
best efficiency heat pipe solar collector
EN 12975 heat pipe solar collector (SOLAR KEY MARK,SRCC,CE,ISO9001).
EN 12975 best efficiency heat pipe solar collector (SOLAR KEY MARK,SRCC,CE,ISO9001)
Heat pipe solar collector with SOLAR KEYMARK
Features:
Heat pipe vacuum tube: 58 x 1, 800mm
Heat pipe: 0.8mm in diameter
Flowing passage: 1.2 mm thick high quality rose copper (TU1)
Outer casing: 1.8mm thick aluminum alloy
Bracket: 1.5mm thick galvanized steel
Hail resistance: Diameter 30mm
Insulation layer: 50mm thich rockwool
Heat preservation: 72 hours
Maximum working pressure: 0.6mPa
Packing: Standard export carton
Quality certificate: SOLAR KEYMARK SRCC, ISO 9001: 2000, CE and CCC
Free-headache logistics service
Warranty: 10 years for vacuum tube
Three-target Vacuum Tube Performance and Specification: | ||||
Tube structure | All-glass double deck co-axial structure | |||
Glass material | High borosilicate 3.3 glass | |||
Outer tube diameter and glass thickness | Ø58±0.7mm; Glass thickness 1.6±0.15mm | |||
Inner tube diameter and glass thickness | Ø47±0.7mm; Glass thickness 1.6±0.15mm | |||
Tube dimension | 58*1800mm | |||
Absorption coating property | Coating material | CU/SS-ALN(H)/SS-ALN(L)/ALN | ||
Sediment method | Three Target magnetron sputtering plating | |||
Absorptivity | α =0.92~0.96 (AM1.5) | |||
Emission ratio | Emission: ε=0.04~0.06(80°C±5°C) | |||
Vacuum degree | P≤5.0X10-3(PA) | |||
Stagnation temperature (temperature inside of empty evacuated tubes) | 260~300 °C | |||
Average heat loss | ULT 0.4~0.6 W/(m2 *°C) | |||
Hail resistance | Ø25 mm | |||
24mm Premium Heat Pipe Performance and Specification: | ||||
Heat pipe material | Oxygen free copper (TU1),Cu=Ag>99.99%(o2<16ppm) | |||
Condenser dimensions | Top: Ø24mm *65mm,Body: Ø8*0.6mm.length:1750± 10mm | |||
Heat-transfer-fins | 0.3mm/0.0098’’ thick sets of Aluminum fins,1630mm | |||
Starting speed | 30s | |||
Max. operation pressure | 6bar | |||
Max. testing pressure | 12bar | |||
Stagnation temperature | 236°C | |||
Manifold Performance and Specification: | ||||
Manifold header pipe | TU2 copper | |||
Manifold casing | Anodized aluminum alloy (6063-T5/T6) | |||
Insulation layer | Compressed rock wool. | |||
Bracket Performance and Specification: | ||||
Bracket | 2.0mm thickness aluminum alloy bracket. | |||
Vertical installation angle | Flat & pitched roof |
Packaging & Delivery
Packaging Details:
1. Standard export packing for FCL order.
2. Special packing for LCL order.
Delivery Detail:
10-15 days after receipt of deposit