CNAMPFORT Disposable 1206 (3216 metric) High Voltage Surface Mount Ceramic Fuses 3.5A 5A 250V For Overcurrent Protection

Applications

Secondary Protection

DC and AC Circuits with inrush

LCD Backlight DC-AC Inverter

- Automotive Navigation System

- Thin film transistor LCD flat-panel display screen

- Notebook

- PC computer

- Office electronic equipment

- Industrial equipment

- Medical equipment

- POE, POE+

- LCD / LED monitor

- Power supply

- LCD / LED TV

- DC-DC Converter

• ABS Systems, ECUs, Motors, Remote Keyless Entry

• Battery Management, Cell Balancing and Protection

• GPS connectivity, Navigation, V2X communication

• Headlights, Sunroofs, Door Locks, Wire Harness

• HVAC and Climate Control

• Ignition System, Transmission and Engine Control

• Infotainment, Display, eCAll

• DC Output Charging, Plugs, and CigaretteLighter Accessories

Description

1206 size surface mount fast acting chip fuse, with improved surge withstand performance. max 250V DC voltage rating, 250mA to 8A current rating, -55ºC to +125ºC operating temperature.

UL characteristic

High melting I²t-values

High current ratings up to 25 A

Impermeable to potting compound

IR Reflow Process - 260ºC, 10 Sec., Max.

Multiple Safety Agency Approvals

Operating Temperature: -55ºC to +125ºC

Mil-Std 202G Environmental Compliant

- Fast Acting, with improved surge withstand performance

- Small size, 1206 SMD

- Current rating from 250mA to 8A, fuse marked with ampere code

- Wide operating temperature range from -55℃ to 125℃

- Tape and Reel for automatic SMD placement

- Compatible with 260℃ IR Pb-free and wave soldering process

- Full compliance with EU Directive 2011/65/EU and amending directive 2015/863(MSL = 1)

- Halogen Free and Lead Free

Size

Specification

1,AC Interrupting Rating tested at rated voltage with unity power factor. DC Interrupting Rating tested with time constant <0.8 ms for 32 VDC, <2.2 ms for 65 VDC, <0.22 ms for 125 VDC, and <0.1 ms for 250 VDC.

2,Measured at ≤ 10% rated current and 25℃ ambient.

3,Melting I²t at 0.001 second pre-arcing time