TDK Epcos B59052D1080A40 Cross Screw-on PTC Thermistor 100 Ohms 80°C 30V For Limit Temperature Sensors

Applications Of PTC Thermistor 100 Ohms 80°C 30V

Limit temperature sensor

Features Of PTC Thermistor 100 Ohms 80°C 30V

1) Sensor with epoxy resin coating
2) Tinned leads
3) Metal tag for easy mounting
4) Lead-free terminals
5) Characteristics for sensing temperatures
6) Metal tag permits good thermal coupling and thus short response time
7) RoHS-compatible

Dimension in mm Of PTC Thermistor 100 Ohms 80°C 30V

Electrical Performance Of PTC Thermistor 100 Ohms 80°C 30V

Handling Of PTC Thermistor 100 Ohms 80°C 30V

PTCs must not be dropped. Chip-offs must not be caused during handling of PTCs.
The ceramic and metallization of the components must not be touched with bare hands. Gloves
are recommended.
Avoid contamination of thermistor surface during handling.

Soldering (where applicable) Of PTC Thermistor 100 Ohms 80°C 30V

Use rosin-type flux or non-activated flux.
Insufficient preheating may cause ceramic cracks.
Rapid cooling by dipping in solvent is not recommended.
Complete removal of flux is recommended.
Standard PTC heaters are not suitable for soldering.

Storage Method Of PTC Thermistor 100 Ohms 80°C 30V

1. In the process of storage and transportation, per stack height is not more than 4 CTN products.
2. Available with all transport method, but avoid the rain, snow of direct or indirect leaching and mechanical damage.
3. Products should be stored in the temperature of environment - 10 ℃ / + 40 ℃, relative humidity is not more than 75%,
environment should not have acid, alkali and corrosion gas or radioactive source.
4. Period of Storage:1 year.

Related Products Of PTC Thermistor 100 Ohms 80°C 30V