Cold Truck Tire Retreading Equipment PLC Control Curing Chamber

Overall 5800*2150*2250mm Inner diameter 1500mm
Weight 3300KG Max tire diameter 1300mm
Power 60kw Max tire size 1200R24
Working pressure 0.7/Mpa Electric Supply 3 Phases
Note Above Details just for 12 Tire Curing Chamber

Standard Function Description
 Curing Time Memory System
 Triply Security Checking on Pressure
 Electric, Steam and Oil Heating Option
 Exactly Different Pressure Control System
 Three Point Temperature Monitoring System
 Automatic Air Pressure and Temperature Self-compensating System

Technical Parameter
Curing Chamber(C-1500-N)
Optional Function Description
 PLC Control System
 Rim and Rimless System Curing Chamber
 4,6,8,10,12,14,16,18,20,22,24,30 Tire Curing Chamber Option

Our equipment which has advantages of stable and reliable performance is the most widely used steam vulcanizing boiler, the temperature, pressure and time can be controlled automatically and it also easy to operate. And the equipment can save 35% of energy than other traditional equipment.

Working principle for steam vulcanizing autoclave

The steam enter into the steam diffusion tube by entrance of steam which at the bottom of the steam vulcanizing boiler and the entrance can be controlled by automatic valve. The steam diffusion tubes vertical arrangement in the bottom of the tank. The small holes which diameters are 3mm,4mm and 5mm on the steam diffusion tube are arranged according to certain rules and angel to ensure that the steam spread in the tank evenly. Thus it can prevent the different quality of the product because of the uneven steam. After set working procedures, the heating, heat preservation, vulcanization and etc can be finished by automatic control system. The equipment stop working and give alarm after all procedures finished.

Working principle for electricity steam vulcanizing autoclave

Electric heated tubes are arranged in the bottom of the tank according to certain rules, the heat ex-changer linked the electric heated tubes and the water channel. The height of the sink is 5~15mm. The steam which produced by electric heated tubes and water spread from down to up evenly until turn into condensate water pour into the sink after touched the wall of tank and then heat again. The temperature of the tank evenly and the pressure has no error, so it can prevent the different quality of the product because of the uneven temperature and pressure. After set working procedures, the heating, heat preservation, vulcanization and etc can be finished by automatic control system. The equipment stop working and give alarm after all procedures finished.