Titanium ribbon anode 6.35x0.635mm for cathodic protection (ICCP) specification

Material:gr1 titanium as substrate

Nominal Dimensions of Solid Ribbon:

Ribbon dimensions: 6.35mm width x 0.635mm thickness (1/4" x 0.025")
Standard Coil Length: 328 ft (100m)
Standard Coil Weight: 2.5 lbs (1.12kgs)
Surface Area of Ribbon: 0.014m2 per m
Current Output of Ribbon in Fine Sand:
12.8mA/ft (42mA per m) when operating at an anode current density of .278 A/ft2 (3 A/m2)
Design Life:
50 years + when operating at an anode current density of .278A/ft2 (3 A/m2)

MMO titanium Ribbon Anode Size sheet:

Typical Application for Ribbon anodes

Other MMO titanium anodes for cathode protection

Titanium Conductor Ribbon/Solid Ribbon Titanium Anode

Ribbon Mesh Titanium Anode

Wire Titanium Anode

Rod Titanium Anode

Tubular Titanium Anode

Test report of coating thickness:

We can provide the Accelerated Life Test, Coating X-Ray Test, Coating Thickness Test, Contact Resistance Test, Electrochemical Performance Test and other test.

Titanium ribbon anode 6.35x0.635mm for cathodic protection (ICCP) in Fine Sand and Concrete application case

Here is an example of a cathodic protection (ICCP) application for a titanium ribbon anode with dimensions of 6.35x0.635mm in fine sand and concrete:

A concrete jetty that extends into the sea is experiencing corrosion on its steel reinforcement bars due to the saltwater environment. To prevent further corrosion and extend the lifespan of the structure, ICCP will be implemented using titanium ribbon anodes.

The anodes will be buried in a trench around the perimeter of the jetty and embedded in fine sand, which will provide electrical contact with the anodes. The ribbon anodes will be spaced at regular intervals along the trench to ensure even current distribution.

The anodes will be connected to a DC power source that will supply a protective current to the structure. The current output of the anodes will be adjusted based on the size of the jetty and the level of corrosion protection needed.

The titanium ribbon anodes will be coated with MMO to improve the efficiency and durability of the anodes in the harsh saltwater environment. The anodes will be connected to tinned copper or platinum wire, which will be crimped or welded to the anode ribbon.

The expected lifespan of the titanium ribbon anodes in this application is 20-25 years, depending on the specific conditions of the environment. Regular monitoring and maintenance of the ICCP system will ensure that the anodes continue to provide effective corrosion protection over their lifespan.