White toilet drain connector, high quality PVC material 90 straight pipe

The blowpipe is the smelly water that releases urine and feces.The drain pipe can be directly discharged, and the sewage pipe will be degraded by the septic tank.If the drain pipe is connected to the sewage pipe, when flushing the sewage pipe, the odor in the pipe may be compressed by the air flow out of the water storage curve of the drain pipe, causing indoor air pollution.Similarly, when the sewage pipe is connected to the drain pipe, it will pollute the drainage pipe and cause the pollution around the drain pipe outlet.According to the conventional connection method, the sewage pipe is only connected to the squat toilet, not to other pipes.The outlet of the drain pipe is treated with water proofing, normally there will be no problem.

How many kinds of dimensions does the discharge pipe of common toilet have?

1, and wash basin, basin of washbasin, tub, health linked drainage pipe, pipe diameter for dn32 (sewer pipe size is 32 mm in diameter), the specification can be used with strong dn40 (sewer pipe size 40 mm diameter).

2. The diameter of the drainage branch pipe connected with the urinal and urinal bucket is dn50(the diameter of the lower pipe is 50mm) and dn75(the diameter of the lower pipe is 75mm).

3. The drain pipe diameter connected with the urinal is dn110(the diameter of the lower pipe is 110 mm)

Background:

Installation of toilet drain pipe -- introduction of installation method of toilet drain pipe

1. Before installing the toilet drain pipe, make sure that every toilet drain pipe and every accessory are inspected in detail and carefully.Check to see if the toilet drain pipe is damaged or worn, especially if the toilet drain pipe is leaking.Hold this, check if the specifications of the accessories meet the criteria of toilet drainage pipe, when connected, must be in the correct method of operation, good connection after also need to take the relevant tests.

2. The direction of toilet drain pipe is also a noticeable problem in the whole installation project.The suggestion that the top of the toilet drain pipe is the safest objection.Because if the toilet pipe goes under the ground, such as all kinds of leakage, it is difficult to timely and effective detection.The method such as water pipe jacking can be found in time even if the water pipe is leaking, so as to adopt an effective treatment scheme to reduce the loss of users.

3. After installing the toilet drain pipe, it is necessary to carry out effective and correct test.

(after the production of the product, the company will conduct more pressure test on the product, and only after passing the test, will it be produced to the outside world, so we have the majority of advantages in the quality system.)