Watertight seal flange, ABS material seal flange screw group, toilet accessories seal flange.
The flange ring at the bottom of the toilet (or flange ring, the toilet seal) is a gasket made of wax and placed on the ground.Installing a flange ring saves money and can solve the problem of water leakage in the toilet, avoiding more damage.But in the installation process, please be sure to operate at above 21 degrees Celsius. Why?Because the wax at this time is easily bent for installation.Also, remember to put on plastic gloves before you replace the old one.
Name: | Plastic flanges for toilet accessories. |
Type: | S-203-1 |
Brand: | San-Tide |
Origin: | Chian xiamen |
Import: | no |
Scope of application: | implement |
USES: | Hole in sealed |
Shape: | O ring |
Standard parts: | Standard parts |
Properties: | Corrosion resistance and wear resistance. |
Specifications: | Toilet flange |
Quality level: | High quality rubber |
Usage: | Installed directly |
The steps are as follows:
1. First determine the shutoff valve (water valve or total water valve at the toilet).
2. Flush the water from the tank and pan.
3. All remaining water in the drain tank and potty, which can be used with a thick towel or sponge.
4. Remove the nut cover on the floor and unscrew the nut, which may require the use of lubricating oil and pliers.
Disconnect the water supply.
Move the toilet gently back and forth, loosen the wax seal and the glass.Take care of the bedpan, not the water tank.If you hold the water tank, you may break or break the connection between the tank and the basin.
7. Remove the old wax seal rings on the combined surface.
8. Open the new flange ring (which can be bought at the hardware store), and make it round to the side, and set it on the flange of the ground, so that it is right above the opening.Make sure two screws are in place.
9. Lift the toilet, cover the flange and the wax seal, and keep the toilet level as far as possible.
10. Sit on the toilet, help the new flange ring seal, and make sure the bedpan remains horizontal.
11. Reload the nut that has just been removed.Tighten the nuts with your hand to avoid cracking the bottom of the toilet.
Reconnect the water supply.
13. Open the water valve to hold the water tank.
Flush and check for leaks.
15. If you need to glue between the floor and the bedpan.
We're done!Well, it's not that hard, and remember to wash your hands with hand sanitizer.
Implement flange is a kind of sealing ring, like butter that kind of, is to install a toilet to use, in a toilet at the bottom of the outlet, the sealing effect, prevent water rushed to the drainage pipe in the toilet outside, also prevent sewage pipe stink.
Flanges, also known as flange flanges or flanges.Flanges are the parts connected between pipes and pipes for connection between pipes.Also used in the equipment import and export flange, for the connection between two devices, such as reducer flange.Flange connection or flanged joint is a detachable connection that is connected by flange, gasket and bolt as a group of sealed structures.The pipe flange means the flange used in the pipe fitting, which is used to refer to the inlet and outlet flange of the equipment.The flange has holes in it, and the bolts fasten the two flanges.The flanges are sealed with gasket.Flange tap connection (threaded connection) flange, welding flange and.
Clamp flange.