Biomass Sawdust Peanut Straw Husk Pellet Machine Vertical Pellet Machine

Working principle of biomass pellet machine:
The principle of TONTEN MACHINERY LIMITED biomass pellet machine is to use the process of converting mechanical energy into thermal energy to heat the material and make it into a rod-shaped solid fuel. The pellet machine is mainly composed of two parts: the upper body and the lower body. When working, the upper body is driven by the motor to rotate at high speed, and the lower body is driven by the pulley to rotate at a relatively low speed. The push plate installed in the annular groove between the two rollers sends the biomass material to be processed into the annular groove. After being scooped up by the scraper on the annular groove wall, it enters the cavity and is directly hot-extruded into a rod-shaped or cylindrical solid fuel.

Advantages:
1. The length can be adjusted at any time, so that the length of the pellets can also be adjusted at any time.
2. The biomass pellet machine has high stability in operation. The operation of the pellet machine is very simple, and it does not require human effort to operate. You only need to send the raw materials to the device to realize automatic operation
3. The use of multi-processing makes it more durable, and the design is reasonable. The use of upper and lower layers of mold holes not only reduces costs, but also increases production and efficiency.
4. The pellet machine adds a steam vent to reduce the temperature inside the machine mold and make the mold last longer.
5. The use of very thick steel plates greatly increases the deadweight of the machine, making the machine more stable.
6. The biomass pellet machine is a clean, energy-saving and carbon-free form of energy. It can not only reduce the operating costs of enterprises, reduce the investment costs of enterprises, but also reduce carbon emissions and reduce air pollution, thereby realizing green energy development
7. The operating cost of the pellet machine is low, and the investment cost is also lower than that of traditional power generation. It only requires a small amount of investment to achieve it, which greatly reduces the pressure on the enterprise.
8. The feeding method is vertical material, and due to the centrifugal force, the material blockage is avoided.
9. The automatic lubrication system has been added, which changes the time of each oil injection and can work 24 hours a day, thereby increasing the output.
10. The pressure wheel rotates to generate centrifugal force for the material, which is evenly distributed around.
11. The surface of the pellet machine is painted to increase the corrosion resistance of the machine, which also increases the aesthetics of the machine.

Biomass pellet machine parameters:

Biomass pellet machine picture: