3 Layer Flat Disposable Face Mask Making Production Line With Inner Earloop And Edge Covered

Automatic Face Mask Production Line Introduction:

This machine is mainly used for automatic forming of flat mask. Unwinding the whole roll of cloth, automatically folded and wrapped; unwinding the whole roll of rubber strip, cut to fixed length and then put into the wrapped cloth; both sides sealed by ultrasonic welding machine; then cut to form; send the mask to ear belt welding stations. Then collect the completed mask by laminating machine.

LA-2T1 series full-automatic mask production line is our latest product, with fine workmanship, stable performance and high production efficiency.

The disposable mask production line adopts a “one with one” design, that is, a mask forming machine, two ear band welding machines (inner ear bands) are connected through a one-to-two transmission line.

The line can realize the full-automatic production process from coil feeding, folding and pressing, and slitting, ear band feeding, welding, and unloading.

It can produce disposable masks with a size of 175 * 95mm . The daily production capacity is 120000-150000PCS (24h).

Features:

1. High stability, low failure rate, beautiful appearance without rust.

2. Computer PLC programming control, servo drive, high degree of automation.

3. Photoelectric detection of raw materials to avoid mistakes and reduce waste.

4. The automatic mask making machine is automatic from material feeding to mask collection.
5. High automation in ear-loop welding, edge wrapping, counting, and material discharging.

6. The ultrasonic technique does no harm to the characteristic of the material. Easy and safe operation.
7. Artistic and durable, aluminum alloy board, lean and practicality.
8. Faster, Rotary connection device of Independent innovation design.
9. More stable, upgraded machine, touch screen, Taiwan photoelectric detection, stable performance, and low failure rate.

Earloop welding machine introduction:

This equipment adopts an ultrasonic welding process. The elastic earloop are fused on the inside of the two ends of the mask body.

It is the last processing step of the production of ear band masks. Only one operator needs to place the mask body piece by piece in the mask plate.

To the finished product is completed automatically by the equipment.

This machine adopts servo, step drive, precise transmission, and adjustable speed.

This equipment adopts ultrasonic welding process. The elastic bands are fused on the inside of the two ends of the mask body.

It is the last processing step of the production of earband masks. Only one operator needs to place the mask body piece by piece in the mask plate.

To the finished product is completed automatically by the equipment.

Raw materials for manufacturing face mask:

Specifications of Production Materials: