A deployment unit |
A1 | Rotor pump | Ø 1T-3T/H (varies according to material characteristics) Ø Self-priming function, suction lift 6 meters Ø Outlet pressure 0.6MPa Ø Power 2.2KW Ø The maximum allowable material viscosity is 1 million CP |
A2 | Flowmeter | Ø Interface size: DN20 Ø Measurement accuracy: 0.5% Ø Full scale range: 0.5-10 m/s Ø 4-25MA output Ø Self-diagnosis, fault record, output current test, control input (output), test, simulation test mode, Ø Empty pipe indication settings, etc. Ø It is used for measurement of raw materials, auxiliary materials, etc. |
A3 | High Shear Excipient System | Ø Rated capacity: 300L; Ø Three-layer jacket structure, middle polyurethane foam insulation, steam heating Ø Steam valve group: drain valve, filter, pressure reducing valve, angle seat valve, steam trap, globe valve, etc. Ø Including manhole, breathable cap, cleaning ball, water inlet, material inlet and outlet, sampling valve, glass sight tube; Ø The surrounding R-shaped arcs are excessive and have no dead ends, and the mixing is more uniform; Ø Sugar melting time: about 5-20min/time, the specific time needs to be determined according to the characteristics of different materials; Ø High-speed stirring at 2800rpm; Ø Variable frequency speed regulation Ø Power 7.5KW; Ø For quick dissolution of excipients and sugar |
A4 | Material pump AIDEKE | Ø Flow: 1M3/H; Ø Head 24m; Ø Stainless steel Ø Power: 0.75kw |
A5 | Duplex filter | Ø Rated flow: 5T/H Ø Filtration precision: 30um-1mm (optional standard specification) |
A6 | Mixing tank | Ø Capacity: 1000L Ø 304 stainless steel material; Ø Double-layer upper and lower cone-bottom structure; inner wall 2.5mm, middle 50mm polyurethane foam, outsourcing 1.5mm Ø paddle stirring; Ø The outer surface adopts wire drawing board; Ø Liquid level tube, temperature gauge; Ø Cone top and cone bottom structure, cone bottom 15℃, including manhole, vent cap, cleaning ball, water inlet, material inlet and outlet, sampling valve, glass sight tube; Ø The inlet and outlet adopt anti-foam and anti-swirl structure; Ø Variable frequency speed regulation Ø Power 1.1kw |
| Operation platform (for preparing and chemical accessories) | Ø 304 racks, skid plates, guardrails, ladders, etc. |
A7 | Material pump | Ø Flow: 1M3/H; Ø Head 24m; Ø Stainless steel Ø Power: 0.75kw |
A9 | Duplex filter | Ø Rated flow: 5T/H Ø Filtration precision: 30um-1mm (optional standard specification) |
A10 | CIP return pump | Ø 5T/H Ø With self-priming function |
A11 | Centralized Control System | Ø Siemens PLC, touch screen Ø The cabinet is made of SUS304 stainless steel; Ø Schneider Omron Low Voltage Components Ø AirTAC Pneumatic Components |