item

Krohne/Germany

E+H/Switzerland

1.5mm for small diameter(1.25”,1.5”,2”)

2.0mm for big diameter(>2”)

Ø Horizontal structure with dual workstations;

Ø Suitable for processing various crushed fruits and vegetables in pulp

Ø Mesh diameter Φ 0.8mm- Φ 1.2mm, one set each, used to remove the skin from the jam, while refining the product to make its particles small and uniform;

Ø The drive adopts dual motors;

Ø The beating machine body is made of SUS304 stainless steel material,

platform

Ø 304 stainless steel pedestrian steps,

Ø 304 material protective railings and handrails

Ø anti slip corrugated surface, platform feet fixed on the ground;

Ø 304 stainless steel material;thickness 3mm

Ø Single-layer upper and lower cone-bottom structure;

Ø With stirring

Ø The outer surface adopts 2B sheet;

Ø High and low liquid level control;

Ø Conical top and cone bottom structure, including manhole, vent cap, cleaning ball, water inlet, material inlet and outlet, visual sight glass;

Ø The inlet and outlet adopt anti-foam and anti-swirl structure;

Ø Food grade rubber stator; mechanical seal with thruster

Ø Outlet flange connection;

Ø Tubular type

Ø It is produced and manufactured by patented technology, which is the leading special sterilizer for high-viscosity materials in China. It is mainly composed of a heat exchanger, a continuously variable transmission pump, a retainer, a closed water bucket, a plate type superheated water heat exchanger, and a controller. The process of the equipment is as follows:

Ø Material inlet temperature 40℃~50℃

Ø Material outlet temperature is less than 40℃

Ø Sterilization temperature 95℃~121℃

Ø Sterilization time 15S

Ø Cooling water temperature <30℃

Ø One set of screw pump with adjustable speed

Ø One CIP pump

Ø Pre-material buffer tank with stirring

Ø Superheated water heating plate, sealed water tank with sterilization pump

Ø Steam valve group: globe valve, pressure reducing valve, regulating valve, steam trap, filter, etc.