LIQUISE 8-Inch Face Recognition Temperature Instrument Infrared Module Thermometer For Children And Adults
Product Features
1. Embedded face recognition detection and living body recognition algorithm based on deep learning, with a recognition speed of less than 300 seconds;
2. Built-in thermal imaging temperature measurement sensor module, which can quickly measure the temperature of the human face (± 0.2℃);
3. The host runs the Android 8.1 operating system and uses the latest face detection and recognition models to quickly capture faces,intelligent face quality judgment, and accurate face comparison and recognition;
4. Using the latest technology to extract face features , To minimize the impact of the contrast of the face angle, light, expression and other adverse factors on the results.
5. Integrated design, easy to install, simple and reliabl
Applicable to office areas, hotels, office buildings, schools, shopping malls, shops, communities, public services and management projects that need to use face access control places.
Technical parameter:
Screen | 8 inch |
Overall size | Long 284* width 140*high29mm |
processor | High performance 32 bit 4 core ARM chip |
Storage memory | 16GB |
Measurement mode | Infrared thermal imaging temperature measurement |
Measuring distance | 0.3m~1m(suggest 0.5m) |
communication method | TTL |
Temperature measurement accuracy | ±0.2℃~±0.4℃ |
Operating temperature | -20~65℃ for |
Storage temperature | -40~65℃ for |
Power supply | 3-5V |
Electric current | 2ma |
Baud rate | 9600/115200 |
Default automatic output frequency | 14Hz |
Wavelength range | 8~14µm |
Temperature output | parallel output at any time |
Temperature correction | Manual and automatic calibration |
Alarm threshold | Adjustable |
Wiegen interface | Support weigen 26 weigen34 |
Other interface | 232 TTL WIFI RJ45 |
Type | Can be wall-mounted, desktop, vertical, gate |
camera | 200w:USBConnector,Binocular wide dynamic,Glare |
Aperture 2.8,Focal length 1.6mm,Angle of view 130°,TV distortion<-5%,Photosensitive area size1/5-inch | |
Pixel:meet customer’s need,≥2 million pixels | |
Assembly angle: flat out | |
Image Sensor | 6mm Focal length,F2.4 Aperture |
Fill light | LED:white light,RGBCamera fill light,SDK with control interface |
NIR:850nm Infrared LED light,IR Camera fill light source,SDK with control interface | |
Operating system | Android 6.0.1 or above |
Input power | 12V2A |
Backlight identification illuminance | <6000Lux |
Effective identification distance | 0.5m-4m |
working environment | Indoor,outdoor(With rainproof frame),10~90%(Non-condensing) |
Operating temperature | -20℃~+55℃ |
Card reading speed | 0.2S |
Matching | |
ID card reader | Support second-generation ID card identification function, SDK contains control interface |
LTE Function | Support 4G full Netcom Internet access function |