1500mAh Li-on Battery 8 PCS LEDs Solar Panel PC Material Reflective Road Studs Cat Eyes

Solar road stud adopt high brightness LED as light source, according with safety standards, energy saving, high visibility, installation easily, long life, stable and reliable, non-corrosive cables
No conventional energy consume
Widely used in highway traffic safety alerts.
It can effectively prevent traffic accidents.

Light resources: 4 pcs Superior Bright LED
This LED Road Stud conforms to government standards and industry regulations.
Lighting Time: 15 days after one time fully charged under the sun.

Description:

SOLAR POWER - Using the power of the sun is not only beneficial to the earth, but also to your pocket book. Solar energy is an unlimited, free resource available daily. Utilizing a poly-crystalline solar panel, this road stud can quickly recharge it's batteries throughout the day for use at night while eliminating the need to reguarly purchase new batteries.
LED's - Lighting is one of the most essential items in the modern world. Dwindling resources have put solar lighting front and center in the energy industry. LED bulbs use a fraction of the power as incandescent bulbs and are a fraction of the size. This light features 6 LED lights to provide a super bright light that can be visible for up to 700 yards away.
HEAVY DUTY - Made of high quality poly-carbonate, this road stud is made for almost any situation. Designed to handle loads up to 20 tons, this stud can be used on most roadways without the fear of being crushed or damaged. An IP67 rating means this quality road stud won't be damaged by regular rain or snow fall.

Specification:

Applications:

Safety and convenience have fused into one with this road stud. Safe enough to handle any road, this light can be quickly installed and should never need to be touched again. Quickly change between an on, off, or strobe setting with the flip of a switch. The included 1200mAh Ni-Mh rechargeable battery won't need to be replaced and powers the 6 LED bulbs that are rated to last well over 100,000 hours of use!

Features:

Solar polycarbonate stud
CE certificate, IP68
8*LEDs, Color options: amber/red/white

Competitive Advantage:

1. Reasonable Price

2. IP68,Anti-high(low) temperature.

3. Waterproof,Anti-sunburn and Rainproof.

4. Energy Saving and Environmental

Installation Step:

1. Installation Location:Road Edge

2. Material and tool to prepare

Screw,steel brushes,Scrapers,Chalk,Tape Measure,Plastic Bucket,Stick Broom,Reflective Clothes,Road Cone,Drill,Hammer

3. Installation Process:

a. First use a ruler to determine the installation location,to ensure that the location of the vertical are in a straight line,the installation distance according to the design requirments,the installation ground need to be flat,dry,clean,seamless.

b. Dig the hole

Put the solar road studs in the installation position and set the screw position.

Move the solar road studs and dig the hole with drill for the screw,knock the screw the hole with hammer.Put the solar road studs on the screw and fit the nuts for the screws.

C. Put the cement.

Put some cement on the nuts to fix the screws.

Aluminum Road Stud Details Pictures: