Super Bright 12 PCS LED Road Safety PC Material Flashing Reflective Road Studs with Solar Panel

This plastic solar road stud designed with high brightness LED with optional work mode steady or flash,the solar panel powered supply enable the LED in consistant work lasting at least 15 days after one time fully charged under the sunshine.With high weight capacity resistance 20 tons and waterproof grade IP68,Anti-UV under bad weather conditions.

Description:

Solar Road Stud / Solar Road Marker is a protruding sign. It's self-luminous, energy supply by solar panel and durable Ni-mh battery. Generally used for paving road ,used at night or in the rain and fog weather, and sketched the outline of the road, to improve road safety.

Specification:

Applications:

1. Highway.

2. Bridge.

3. Lane,Crossing

Features:

1 Light control design,can work automatically according to the environmental illuminance.

2 Rainproof , it can work normally in the rainy day.

Competitive Advantage:

1. Reasonable Price

2. IP68,Anti-high(low) temperature.

3. Waterproof,Anti-sunburn and Rainproof.

4. Energy Saving and Environmental

Installation Step:

1.Installation Location:Road Edge

2.Material and tool to prepare

Screw,steel brushes,Scrapers,Chalk,Tape Measure,Plastic Bucket,Stick Broom,Reflective Clothes,Road Cone,Drill,Hammer

3.Installation Process:

a.First use a ruler to determine the installation location,to ensure that the location of the vertical are in a straight line,the installation distance according to the design requirments,the installation ground need to be flat,dry,clean,seamless.

b.Dig the hole

Put the solar road studs in the installation position and set the screw position.

Move the solar road studs and dig the hole with drill for the screw,knock the screw the hole with hammer.Put the solar road studs on the screw and fit the nuts for the screws.

C.Put the cement.

Put some cement on the nuts to fix the screws.

Road Stud Solar Panel Details Pictures: