HOWO Drum mixer concrete truck 16cbm , Concrete transport Truck with Imported pump

Specifications:

Functions of the parts atop the chassis are as follows.
1. Loading
The ability to feed the concrete into the mixing drum
2. Mixing
The ability to prevent the concrete condensing or segregating during transport or waiting for unloading
3. Transport
The ability to transport the concrete from the mixing station to the construction site
4. Unloading
The ability to discharge the concrete
5. Cleaning
The ability to clean the mixing drum
Since the concrete has adhesive force, it will certainly adhere to the parts that are in contact with it, such as the feed port, tank wall, mixing blades, discharge port, etc. To prevent too much concrete attaching affecting the performance of the vehicle, it is necessary to clean the residual concrete that attaches to the tank and other parts.

Notes for New Vehicle Run-in
1. The run-in distance is set to be 2500 km. Before running in, conduct a routine check of the concrete mixer truck to ensure that the vehicle is in normal working condition.
2. After starting the engine, do not accelerate immediately. Wait for 3 to 5 minutes. After the normal operating temperature is reached, you can increase the engine speed.
3. It is strictly prohibited to shut down the engine in the state of warming car. You have to wait for 3 to 5 minutes before shutdown.
4. During the run-in period, the vehicle should run on flat roads.
5. You should shift the gears timely. Smoothly engage the clutch. Avoid sudden acceleration and emergency braking.
6. Before going up the slope, shift into the low speed level. But note that do not let the engine work at very low speeds.
7. In the first 3000km driving distance of the new vehicle, the vehicle load should not exceed 70% of the rated load. The lubrication and maintenance cycle should be shortened in the break-in period.