^{KPT series streamer electric transport vehicle is a transfer vehicle powered by cables. The table top of this type of transfer vehicle can be designed to be lower than that of general battery powered transfer vehicles. However, since it is powered by cable, the running distance shall not be too long, generally not more than 50m. It is easy to wind the cable if it is too long. This type of electric transfer vehicle is suitable for high-frequency working environment, because it is powered by cable, and the problem of working time does not need to be considered. Moreover, the installation is simple, but in the process of operation, it should be noted that the cable cannot be wound to avoid danger.}

^{Track laying.}

^{1. Use a level to find out the leveling layer on the ground and ensure that the track is on the same level.}

^{2. Linoleum or resin shall be used as a spacing between the track and the ground beam to ensure the insulation of the track. The embedded bolts shall be placed in the reserved holes of the ground beam and poured with sand and ash, which shall be solidified on both sides of the track. The distance between the bolts and the track depends on the specification of the track pressing plate.}

^{3. Determine the center distance and inner distance of the track, lock the bolts, and fix the copper bar on the inner side of the track.}

^{4. The inner side of the track shall be completely covered with asphalt or resin.}

^{5. Check the level of gauge and track, with a drop of plus or minus 3mm, so as to prevent the wheels from contacting the track surface at the same time when the rail car is running. And measure that the resistance of the track shall not be greater than 10 ohms.}

^{6. When laying low-voltage insulated track outdoors, special attention shall be paid to the treatment of ponding to prevent too much ponding from causing track short circuit and affecting the normal use of vehicles.}

35 Tons Material Handling Trolley , Stepless Speed Hydraulic Lifting Transfer Cart

The utility model has the advantages of simple structure, convenient use, easy maintenance, large bearing capacity, less pollution, etc.. It is widely used in machine manufacturing, warehouse, metallurgy factory, etc.. as a workshop internal coordination crane to transport heavy objects across. Such as: transportation of raw materials, machining and finished products.

^{Henan Remarkable Intelligent Technology Co., Ltd is a professional handling equipment company integrated intelligent R&D, design, manufacturing, sales as well as after-sales service. It specializes in producing electric transfer carts of various tonnages, handling equipment accessories, intelligent crane and crane accessories with professional design, development and manufacture of non-standard, intelligent electric transfer carts and handling robots. According to different power mode, the handling equipment products can be divided into six series including low-voltage track-powered, battery-powered, towline-powered, cable reel-powered, safe-trolley-line powered, and unpowered traction.}