20T Electric Concrete Mould industrial Material Handing Trackless Transfer Trolley
20T Electric Concrete Mould Trackless Transfer Trolley is powered by storage battery. It is a kind of transport vehicles indoor and outdoor, and it is suitable to be used in the long running distance transportation and low using frequency without extra power supply.
The batteries supply electricity to the DC motor through the electrical control system. Then the reducer drives the wheels of the cart start, stop, go forward and backward, turn left, right and around in 360°(for trackless), the speed also can be adjusted.
The batteries is easy to replace within 5min , full load continuous running 6 hours , the Intelligent charging device can charge the battery full within 8 hours.
Can be customized in a variety of sizes, load 1-300T. so It was widely used in machinery factories, warehouses and metallurgical plants as a workshop transport or with the crane transport heavy loads over cross.
20T Electric Concrete Mould Trackless Transfer Trolley is powered by storage battery. It is a kind of transport vehicles indoor and outdoor, and it is suitable to be used in the long running distance transportation and low using frequency without extra power supply.
The batteries supply electricity to the DC motor through the electrical control system. Then the reducer drives the wheels of the cart start, stop, go forward and backward, turn left, right and around in 360°(for trackless), the speed also can be adjusted.
The batteries is easy to replace within 5min , full load continuous running 6 hours , the Intelligent charging device can charge the battery full within 8 hours.
Can be customized in a variety of sizes, load 1-300T. so It was widely used in machinery factories, warehouses and metallurgical plants as a workshop transport or with the crane transport heavy loads over cross.
20T Electric Concrete Mould industrial Material Handing Trackless Transfer Trolley
The RWP series Trackless Transfer Cart is consisted of power source, gear train, steel structure bearing frame, steering gear, running gear, control system and fault diagnosis module. other functions. It can turn around on the cement floor.All the Trackless Transfer Cart are equipped with warning alarm and security detection apparatus, and the alarm would ring and the car would stop immediately if there was any obstacle or pedestrian in the running path of the Trackless Transfer Cart. Also, we will provide intelligent automatic rapid charger with the Trackless Transfer Cart. Positioning fixture, lift platform and other assistive device are optional to meet different demands on various occasions. The PLC is also alternative if it’s necessary.
After-sales Service
Our commitment: The load bearing safety factor of the trolley is no less than 120%.
Freely design the auxiliary device or foundation drawing, and offer the technical service and drawing material.
16 hours engineering service and 24 hours internet service for our customers.
During the warranty period, if our products can't work normally, we can support you repair technology or replace relevant parts for you within 24 hours.
Solving the quality problem within 24 hours, serious attitude from beginning to end. Value the reputation and Preserve the image of our company.
Technical parameters for electric transfer carts | |||||||||
1 | rated load(t) | 5 | 10 | 15 | 20 | 30 | 40 | 50 | 150 |
2 | impacted rated load(t) | 7.5 | 15 | 22.5 | 30 | 45 | 60 | 75 | 225 |
3 | structure of frame | steel plates welded, beam structure | |||||||
4 | max. wheel load(t) | 2.8 | 4.3 | 4.8 | 5.6 | 7.7 | 10 | 12 | 27 |
5 | ground requirement | cement floor | steel plate ground | ||||||
6 | table size(mm) | 3000×2000 | 3600×2000 | 4000×2200 | 4500×2200 | 5000×2200 | 5500×2300 | 6000× 2300 | 10000× 3000 |
7 | height of the whole cart(mm) | 450 | 530 | 600 | 600 | 650 | 700 | 700 | 1200 |
8 | ground clearance(mm) | 50 | 75 | ||||||
9 | wheels base(mm) | 1500 | 1700 | 1800 | 2000 | ||||
10 | axles distance(mm) | 2500 | 3100 | 3400 | 3900 | 4300 | 4800 | 5200 | 10000 |
11 | turning radius(mm) | 2501 | 3101 | 3401 | 3901 | 4301 | 4801 | 5201 | 10001 |
12 | turning type | turning while driving with no stop | |||||||
13 | control method for turning | control button | |||||||
14 | turning structure | mechanical | |||||||
15 | motor power(Kw) | 3.5 | 5 | 6 | 7 | 10 | 12 | 15 | 15 |
16 | wheel diameter(mm) | Ф300 x 4 | Ф350 x 4 | Ф400 x 4 | Ф400 x 6 | Ф500 x 6 | Ф600 x 8 | ||
21 | battery model | D-250 x 24 | D-33 x 24 | D-400 x 24 | D-440 x 24 | D-250 x 36 | D-330 x 36 | D-440 x 36 | D-600 x 36 |
22 | battery maintenance | free of maintenance | |||||||
23 | charger's installation | installed on cart | split-type | ||||||
24 | charger function | automatic charging | |||||||
25 | radar control | 3-0.3m, automatic stop for obstacles | |||||||
26 | warning equipment | sound and light | |||||||
27 | other functions | turning light, night light and power display |