High Frequency Partial Discharge Test Equipment 100K-50MHz Detection Bandwidth
Product Introduction
The development of maintenance technology of electrical equipment can be roughly divided into three stages, namely fault maintenance, periodic maintenance and status maintenance. As the primary requirement of power system operation, power supply reliability is becoming more and more important. The status maintenance can identify the existing or potential signs of deterioration by measuring the key parameters of the equipment, and evaluate the status of the equipment without shutdown.
Technical Parameters
The Host Parameter | ||
Number of Detectable Channels | 2 | |
The Sampling Accuracy | 12bit | |
Triggered | Internal synchronization, external synchronization | |
HFCT Parameter | ||
Detection Bandwidth | 100K-50MHz | |
Transfer Impedance | >5mV/mA(10MHz ) | |
Output Impedance | 50Ω | |
Detection Sensitivity | 5pC | |
Measuring Range | -20~80dB | |
Measurement Error | ±1dB | |
Resolution Ratio | 1dB | |
Output Interface | Standard BNC | |
US Parameter | ||
Frequency Range | 20kHz-300kHz | |
Output Impedance | 50Ω | |
Detection Sensitivity | 0.1mV | |
Measuring Range | 0.1mV~1V | |
Output Interface | Standard BNC | |
Hardware | ||
Display | 4.3” TFT LCD | |
Resolution Ratio | 480×272 | |
Operation | Membrane key | |
Storage | SD card is equipped with 16g card as standard, with the maximum support of 32g | |
Power Supply | ||
Internal power supply | Battery powered (16.8v lithium battery) | |
Normal working hours | About 7 hours, full time about 5 hours | |
Size | ||
Length × width × height | 235mm×133mm×48mm | |
Weight | 0.85kg | |
Environmenta | ||
Operating ambient temperature | -20℃ to 50℃ | |
Storage ambient temperature | -40℃~70℃ | |
Humidity | 10%-90% | |
Altitude | ≤3000m |